Capacity:
• Max. thickness:
Stainless steel: 1.6 mm
Mild steel: 3.2 mm
• Max. hole diameter: 4 inch
• 4 inch diameter hole on 3.2 mm thickness mild steel
Specifications:
• Max. Pressure: 700 bar
• Oil Required: 47 cc
• Max. Output: 10 ton
• Ram Stroke: 25mm
• Dimension: 125 (H)mm
• Weight: 1.9 kgs
Benefits:
• Hydrualic punching tools are made from high quality materials
• Characterised by perfect and problem-free punching of metal
sheet to thickness of 3.2 mm(mild steel) and 1.6 mm(stainless steel)
• HP-180N is designed for PDV-10 (Punch driver) or any other tool
heads that require less than 180 cc of oil volume. HP-180N is not
equipped with a relief valve.
Do not use HP-180N with any compression head that requires
a relief valve.
Packing:
• Kudos plastic case
• Accessories:
PDV-10 (Punch driver)
HP-180N (Hydraulic hand pump)
6 sets Punch & dies (1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″)
3 pcs Draw stud adaptors (S, M, L)
2 pcs Draw studs (3/8″, 3/4″)
In this session of Build your Nastran In-CAD IQ, James Kubli and Allan Fowkes talk about how to determine if you have a good mesh in Autodesk Nastran In-CAD. Learn from the experts how to deal with geometric singularities and how to use different mesh settings to tweak your mesh to meet your needs.