Chuyên sản xuất: Khuôn Hàn hóa Nhiệt tiếp địa KUMWELL/TY REN/TY TREO/TY RĂNG/THANH REN/ TY TREO mạ kẽm M6, M8, M10, M12, M16 – (High quality Galvanized Thread Rod) 1m, 2m, 3m, đạt tiêu chuẩn JIS B 1051 – JAPAN & DIN 975 & DIN 976- Đức, Đai treo /Cùm treo, Đai treo 2 mảnh (Pipe hanger/Conduit Clamp), tắc kê đạn, Đai treo Omega, cùm omega, Cùm Ubolt, Cùm Ubolt lá (U Bolts) Gía đỡ cơ điện (M&E/Mechanical Fixings, Fasteners and Spring steel Supports) Cùm treo ống / Kẹp treo ty & ống / Kẹp treo ống thép luồn dây điện, ống PCCC/ HVAC (Steel conduit hanger/Pipe hanger/Clevis Hanger), Kẹp xà gồ/ Kẹp dầm thép (Beam Clamp/Suspending Clamp/C-Clamp), Thanh chống đa năng (Unistrut Channel/ Strut/ C-Channel/ Double Unistrut profile ), Đai ốc lò xo cho thanh chống đa năng (Long spring nut), Tay đỡ đơn (Cantilever Arm), U cùm ( U bolts), Tắc kê đạn (Drop In Anchor), Đai treo (bát treo) cho hệ thống điện nhẹ M&E / HVAC/PCCC /Điều hoà không khí cho toà nhà cao tầng và nhà máy sản xuất công nghiệp tại Việt Nam.
Mọi thông tin chi tiết về sản phẩm của Cát Vạn Lợi, xin quý khách hàng vui lòng liên hệ: 1900 5555 49
CÔNG TY TNHH THIẾT BỊ ĐIỆN CÔNG NGHIỆP CÁT VẠN LỢI
VPGD : 61 Đường số 7, KDC CityLand Center Hills, P. 7, Q. Gò Vấp, TPHCM
Tel: 08-35886496/ 22 46 46 99
Fax: 08-35886505
E-mail: baogia@catvanloi.com
Website: WWW.CATVANLOI.COM –
https://ongluondaydienvietnam.wordpress.com/
Phòng chăm sóc khách hàng: 0943353039 (Mr.Tâm)
This is the informational video, the demonstration link can be found at the end of this description. click/copy.
1)soak bolts in penetrating oil and let the car sit for at least 2hrs
2) spray again
3) using the 2 hammers, place the ball end on any metal surrounding the bolt ( bushing hosing, mount, control arm)
4) hit the other end of the ball peen hammer with your other hammer using sharp motions to vibrate the rust loose
5) spray, tap, spray.
you will see dirty rust leaking out with the penetrating oil, this means the oil has seeped into the threads and is
removing the rust from the threads.
6) place impact on the first bolt, ideally work your way from the center of your car, towards the wheel (first bolt has the most torque,
and you need the stability of the other end of the arm in order
to break the first bolt loose.) I usually go from the inside, to the far outside, then go to the last bolt (strut bolt)
**DONT REMOVE ANY BOLTS!!!!! JUST LOOSEN THEM WHEN THE THREADS COME OUT, LEAVE THE BOLTS IN UNTIL THEY ARE ALL LOOSE**
7) In short busts: tighten pause loosen. Keep doing this until you see moment.
8) at this point, do longer bursts on the impact. You want more loosen, less tighten. spray in between.
IF THIS IS WORKING THEN SKIP HEAT, IF NO LUCK then hammer spray, impact heat.
do this a few times until bolt starts moving. PATIENCE IS KEY.
9)Thats it. It will backout. If you break the bolt using this method, the bolt was too far gone, and there was nothing
more you could do, this has worked 100% for me so far.
https://youtu.be/xwe6VqSw37A