Mike Kraft gives tips on garage door maintenance. There are three key steps: cleaning, safety and lubricating. Find the detailed instructions here: https://low.es/1Sie7Ma
Start outside, cleaning the outside of your door with a soft sponge or cloth. You should do this once a year or potentially more if you live in a soft air climate. Once it is washed, just rinse with a hose. If the garage door is made of wood, inspect the door to see if it needs to be repainted or stained.
It’s also good to do a safety check every few months or so. Keep in mind torsion springs can cause injuries. If your door uses extension springs, you can find replacements at your local Lowe’s.
When doing safety checks, remove any cars or debris from the garage door area or tracks. Then do a visual inspection of all the cables, rollers, springs and hinges. Replace anything is frayed or worn and tighten bolts. For bolts that are near a safety tag or painted red, only have a trained technician adjust.
Also check the door balance, disconnecting the power first to the opener. Then disengage the door from the opener and raise the door to waist level. Release slowly. If the door raises or lowers, a trained technician will need to adjust the balance.
Use a non-silicone based lubricant to lubricate hinges, springs and bearings. Don’t oil the tracks, or else the door might become unbalanced.
If your door needs some repair, look at your owner’s manual or visit your local Lowe’s for a garage door professional installation.
To find more helpful how-to videos like this, visit Lowes.com/Videos. Also, find garage doors and openers here: https://www.lowes.com/pl_Garage+Doors++Openers_4294858065_4294937087_
Soudage de goujons avec le Procédé ARC FUSION FORGEAGE, AFF, EQUIPEMENT HERA 1000, Version Modulaire, et pistolet G20UNV pour souder des goujons en acier S235 M12x25 (ref: BNST…), avec des céramiques (ref: UF12), 1 mandrin (ref: MA120), 1 semelle standard AFF (ref: SN22) sur une tôle (acier S235, ep: 3mm) Normes : DIN EN ISO 13918, 898-1.