I started seeing severe recoil effects in my videos from my GoPro Speargun mount on Mako 110 speargun. The use of #10-24 screw as the base for the mount cannot stand recoils from the 110cm gun with 2 X 5/8 bands. I still want to mount GoPro at the tip of my gun, so I decided to use my Riffe Euro 100X for the new mount. One thing I do not want to do with my guns is to make holes to attach things. Fortunately, Riffe Euro series have the stainless steel spacer for reinforcement and to block the slings to come off from guns. I can shape a aluminum bar to fit the mount into the slot where the spacer is inserted. I used some metal files to shape the aluminum bar as the base bracket. It took time, but it was not too bad to make. I had to make the insert section of the bracket as the same thickness as the Riffe spacer. All in all it worked out really well. It seemed to be my best GoPro mount so far. Recoils did not shake the camera too much. The bracket is pretty stable. I can still get close to fish because the camera is attached to the tip of my gun.
I gathered all my parts from Homedepot and mcmaster.com
*** Version 1 on my Riffe Euro 75 ***
1 X 3/7 X 1/8″ Aluminium Bar
1 X 1/4″-20 2.5″ Stainless Steel Round Head Slotted Machine Screw
1 X 1/4″ ID 1″ OD Stainless Steel Large-Diameter Flat Washer
3 X 1/4″ ID 1″ OD 1/8″ Thick Abrasion-Resistant Reinforced Rubber Washer
1 X 1/4″-20 Stainless Steel Wing Nut
1 X 1/4″-20 Stainless Steel Stud, 1″ OD Nylon Knurled-Rim Knob
1 X 1/4″ Stainless Steel Lock Washer
1 X GoPro Tripod Mount
*** Version 2 on my Mako 110 ***
1 X 3/4″ X 1/8″ Aluminium Bar
1 X #10-24 3″ Stainless Steel Phillips Pan Head Screw
2 X #10-24 Stainless Steel Hex lock nuts nylon insert
1 X #10-24 Stainless Steel Cap Nut
2 X #10 Stainless Steel Lock washer internal tooth
1 X M5-8 25mm Stainless Steel Phillips pan head cut down to fit
2 X M5 Flat Washer Flat Washer
2 X M5 Flat Washer Lock Washer
1 X Nylon tube for covering screw thread
*** Version 3 on my Riffe Euro 100X ***
1 X 1″ X 1/8 Aluminium Bar (Shaped with some metal files)
1 X 1/4″ ID 1″ OD 1/8″ Thick Abrasion-Resistant Reinforced Rubber Washer
1 X 1/4″-20 0.5″ Stainless Steel Round Head Slotted Machine Screw
1 X 1/4″ Stainless Steel Lock Washer
1 X M5 Stainless Steel Lock Washer
1 X M5 Screw (Cut down to 22mm)
1 X GoPro Tripod Mount
https://www.etsy.com/listing/180618408/dual-iphone-docking-station-new-design?ref=shop_home_active_4
This dual iPhone docking station includes locking set screws for each charging cable. A perfect place to land your mobile devices for daily use or overnight charging. The cut for iPhone is made at a 12 degree angle, perfect for most mobile devices and designed for optimal visibility of the screens on any flat surface or desk. An oval opening with locking set screw is cut in the center of the groove which allows for the lighting connector cord to be plugged into the phone when resting it on the stand. The bottom of this dual iPhone Stand features rubber feet which are screwed in place with solid brass screws to provide secure cushioning and scuff resistance. This Handmade wooden dual iPhone stand is finished with several coats of tung oil to bring out the wood’s rich grain and shine. Great for the home, office, or kitchen counter. You will enjoy this hand crafted wood iPad Grant Stand!
Dual iPhone Stand – Features:
• Wood Type: Black Walnut
• Compatible with: iPhone 5, 6, 6s & similar sized phones
• iPad/iPhone Cut: 12 degree,
• Opening Cut for Phone:
— Thin Cases for thicknesses up to 15/32″ (11.8mm)
— Thick Cases for thicknesses up to 5/8″ (15.4mm)
• Dimensions: 6 7/8″ L x 4 1/2″ W x 1 1/2” H (approx.)
• Finish: Tung Oil
• Charger opening compatible with lightning connector
Each stand is a one of a kind and may be slightly different in color, grain pattern, and knots than the one pictured. Black Walnut often has intensely dark grains and beautiful heartwood coloring. It often contains numerous dark to light colorings giving the grains a beautiful flow and pattern. The Walnut iPhone stands are finished with a Tung oil finish to bring out the shine.
https://www.etsy.com/listing/180618408/dual-iphone-docking-station-new-design?ref=shop_home_active_4