Fiam designed and manufactured a new solution to process two different types of stud bolt: symmetric and asymmetric, threaded elements diffused mainly in the automotive sector (engine assembly, alternator, air conditioners and mechanical components in general).
Scope of solution:
2 Circular feeders customized on the type of stud bolt; they assure high supply and capacity without using hoppers
2 Linear feeders customized to convey the stud bolts
2 Stud bolt selectors:
The system to process asymmetric stud bolts is equipped with a camera that detects the direction of the stud and a special rotating device that oriented the stud in the right direction before conveying it to the nosepiece for the automatic
tightening.
A single stroke fastening slide with:
- Special analog transducer recognizing different fastening depth according to the type of stud and the workpiece to be processed
- Air nutrunner motor with air shut off that ensures the assembly to 4 Nm torque
- Special screw head that can receive and hold both types of stud bolts
Korky Toilet Tank to Bowl Hardware Kit Install by Korky | https://www.korky.com/accessories-kits/toilet-tank-bowl-hardware-kit
Hello and Welcome to Korky toilet repair.
Today we are going to install your new Korky tank to bowl hardware.
First shut off your water supply line .
Flush and hold the lever down to drain the water from your tank.
Sponge out the remaining water in your toilet tank.
Place a bucket underneath your toilet tank to catch any excess water.
Disconnect your water supply line.
Locate and remove all old nuts, bolts, and washers from the toilet tank.
Use the new bolts, rubber washers, washers, and hex nuts, included in the packaging to secure the tank to the bowl.
Apply downward pressure to keep the tank level as you tighten the nuts in an alternating fashion until the tank is stable.
Do not over tighten the nuts; doing so may cause the porcelain to crack.
Reattach the water supply line.
Turn the water supply on to complete your installation.
Congratulations, you have successfully installed your new Korky tank to bowl hardware.
Thank you for choosing Korky.
If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553.