https://www.how-to-repair.com/help/how-a-washing-machine-door-lock-or-interlock-works/
Washing machine door locks really only get 3 major faults
The points between live and common fail in some way.
The NTC heater or bi-metal strip fail.
The plastic gets to hot and distorts inside the lock causing it to jam.
Washing machines must have some way in which you can lock the door closing mechanism when the machine is started up and then unlock them with a certain delay (normally two minutes) after the current has switched off via the program or on/off switch, in order to ensure that the door cannot be opened while some of the components are still rotating initially (in particular the motor and the drum of the spin-dryer).
When you shut the door, the latch on the door pushes inside the door lock onto a sliding bar which moves over and activates an electrical part inside which locks the door shut. At the same time, power is passed through the interlock on to the rest of the machine. The actual latching shut of the door is a simple spring-loaded mechanism where the latch just slips into the door catch and the door stays closed. Locking the door is a separate process.
Support us By Joining Us on FaceBook: https://www.how-to-repair.com/facebook
Support us By Joining Us on Google +: https://goo.gl/P99tzP
Ball Pen Extruder (50mm)
The main extruder having 50 mm SCREW made of EN 41 B series nitride steel having I.d ratio 28:1 duly ground and polished
Barrel
Made of nitride steel having ID 50 mm duly honed
Water Cooling Provided to the barrel at the feeding section.
AC Motor
Ac Motor will be of a reputed make Hindustan motor consisting of 10 HP 1500 rpm
Helical Gear Box
Helical Gear Box will be of reputed Company P.G. Gear having ration 16:1
Heater
Ceramic band heaters for efficient heating.