Manufactur standard ASTM F3125 High Strength Structural Bolts Export to Hanover
Manufactur standard ASTM F3125 High Strength Structural Bolts Export to Hanover Related Video:
On one of the jukebox forums a person was considering purchasing a Seeburg USC1 Bandshell and asked about the procedures for safely moving a jukebox. Spur of the moment decided to make 2 videos and upload them without retakes or editing. This is the first video which describes what the Seeburg installation and operations manual says. If you do not know how to move a seeburg then this can be very helpful. If you already know then this is a really boring 9 minute waste of your time to watch.
The Seeburg USC1 manual, in my opinion, is terrible at explaining how to move a jukebox. They only have 1 poorly written paragraph titled UNBLOCKING on page 9 which tells the original owner in 1970 what 2 screws to remove before playing it for the first time. They don’t explain how to move it later on.
A man named Tony Miller created a helpful website for us seeburg jukebox owners. Tony has passed on but his website is there for all of us to keep learning about seeburgs. There is a page on his site titled Moving Your Machine that is the best resource available.
Bookmark Tony’s Website:
https://www.west.net/~jay/fmillera/fmillera/moving_your_machine.htm
The 2 screws talked about in the manual are 4 and a half inch long carriage bolts. The bolts are 1/4 inch in diameter and have 20 threads per inch. Take this info to your hardware store and buy at least 2. I realized when I went to film this video that I can’t find my stash of carriage bolts.
I am not a seeburg pro therefore I know the words I use are not always Seeburg Jargon. If someone more knowledgable than me will make a youtube video on moving a jukebox I will be glad to point people to that site. Since I couldn’t find a video I just made one and here it is with no edits.
Let me know if this helps. If you want to remove the mech before moving the juke then watch my other boring video!
The reason for bolting is to secure the Mechanism Carriage (the part that travels back and forth playing records). If you don’t secure the Mech Carriage with these 2 bolts then you are asking for various bad things to happen when you move the juke.
Since this specific USC1 model weighs somewhere around 375 pounds; I prefer to remove the very heavy mechanism from the box and move two lighter weights separately. The other video explains how I remove the whole mech from the jukebox.
This tiny quadcopter actually has brushless motors that give it more than enough power (maybe too much 
Buy it here https://goo.gl/qT1VU8 Although powerful, it’s still fully suitable and safe for indoor or outdoor FPV flying in the park.
Pros
- Very powerful brushless ducted fan quadcopter. Very fast for a ducted fan quadcopter.
- Available versions include DSM/Frsky/Flysky (AFHDS2A).
- Omnibus F3 FCB loaded with Betaflight 3.1.0
- 600 TVL camera with 25 mW 48 Channel NTSC/PAL FPV transmitter
- Built-in On Screen Display (OSD), configurable in Betaflight (note the name in the lower left corner of the display .
- 7500 kV brushless motors with 10A BLHELI_S Dshot 4in1 ESC
- Powered by 7.4V 450mah 80C LiPo
- All electronics well protected in composite central structure
- Supporting structure and ducting are aluminum and composite. Very tough.
- Suitable for indoor or outdoor use.
- Does not require FAA registration.
Cons
- Propeller blades are somewhat brittle, and might fail if excessive power is applied.
- AIO FPV camera lightly held in place by small strip of velcro.
- Receiver antenna just a floppy wire. You’ll definitely need to velcro it up and out of the way of the props.
Affiliate links: At no cost to you, I do receive a small commission for sales resulting from these links.
This video along with every video of the Quadcopter 101 channel was produced and edited with VSDC Free Video Editor. You may download this excellent, and no kidding “free” video editor here https://www.videosoftdev.com/free-video-editor
MUSIC LICENSE
“Awel” by stefsax
https://ccmixter.org/files/stefsax/7785
is licensed under a Creative Commons license:
https://creativecommons.org/licenses/by/2.5/
music was shortened to fit length of video.