Brass Copper Set Screw Grub Screws
Metric Size: M1.4 - M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
Home made fret bender to curve very small, very narrow frets for use on a violin fingerboard fretting project. I made this from a scrap of Birch and some parts from the hardware store.
I used 1/2″ Shoulder bolts x 1-3/4″ long, some precision bearings with a 1/2″ I.D. and about 1-1/8″ O.D. along with assorted spacer washers in the SAE type and nylon spacers for low friction purpose. I also fabricated a handle from an old jig saw I had laying around and bent up a stainless flat piece to the shape I wanted and TIG welded the whole thing together. Since I was using clamp collars on the top bolt, I cut off the threads and sanded it smooth. The others were finished off with nyloc nuts as shown. This will easily bend a 42mm radius on the Stew-Mac #764 fret wire as you see here.
Remove years of built up grim with our soft-wash Monty Solution.
This literally applied in seconds, waited three minutes and washed off with a garden hose…Just look at the results in an instant!
No More Jet Washing – No More Mess – No Problem. – Now available to buy. Head over to www.montymiracle.co.uk
Now Available To Buy For Home Or Commercial Use!
Visit www.montymiracle.co.uk or email us for details at
martinevolutioncleaning@gmail.com