An instructional video on how to replace the automatic transmission fluid, filter and pan gasket on a Toyota Camry with a V6 engine.
Procedure is similar to many other cars that use a transmission filter (and not just a screen).
The fluid is drained via 10mm hex bolt, then 17 10mm bolts are removed to drop the pan. The filter is held in by 3 10mm bolts.
Keep the work area clean, as this can quickly become a messy job. A drain and fill of the transmission fluid will replace 1/3rd of the transmission fluid, as the rest is inside the torque converter. Frequent drain and fills over a period of time are recommended to keep the transmission oil fresh and clean. A fluid flush through the cooler lines is not recommended for older vehicles, due to the possibility of clogging a passage with debris.
The fluid was brown after an unknown amount of miles, and the filter had some small particles on its screen. The magnets were full of a magnetic sludge.
Once everything was cleaned it was reinstalled to 69in-lb of torque, and the drain bolt to 36 lb-ft of torque.
The transmission was refilled with Castrol Domestic ATF, which is Dextron III compatible.
https://torkliftcentral.com/rving-and-towing/ecohitch/volkswagen/golf/2015-2018-volkswagen-golf-sportwagen-alltrack-tsi-ecohitch
Torklift Central is proud to show the VW Alltrack/Golf SportWagen hitch installation process for EcoHitch. This receiver hitch is no-drill and bolts onto the factory frame. This is the EcoHitch for the 2015-2018 VW Golf SportWagen and 2017-2018 VW Golf Alltrack.
Part numbers: x7315 (2″), x7316 (1.25″)
• Completely concealed design – only receiver is visible
• 100 percent bolt-on installation – no drilling required
• Engineered to meet stringent national SAE J684 towing safety standards
• Rated for 350 pounds tongue weight, 3,500 pounds towing weight
• Available in 1¼-inch and 2-inch receivers
• Designed to complement the aerodynamic contours and underbody airflow of vehicle
• Manufactured with high impact powder coat
• Material can include a qualified combination of aerospace grade aluminum, stainless steel or steel*
• Eco-friendly, made with recycled materials
• Lightweight
• Free shipping to lower 48 states
• Made in U.S.A
• Lifetime Warranty
*Depending on the application, the product can include a combination of up to three qualified materials
*This video is intended to give a general overview of how this hitch is installed and our fitment process. For more specific information or details, please refer to the written instructions. You can request instructions through our website.
*This video features a partial installation and actual appearance of this EcoHitch may vary if your vehicle is not the exact vehicle featured above.
For more information please visit:
Torklift Central
315 Central Ave N
Kent, WA 98032
253 854-1832
https://www.torkliftcentral.com
support@torkliftcentral.com