Tools used:
36mm 6pt socket
3/4″ to 1/2″ adapter
1/2″ drive x 5″ extension
3/4″ drive x 36″ breaker bar
1/2″ drive torque wrench
flat head screwdriver
robertson head screwdriver
grease
Steps:
1. Unstake the nut.
2. Loosen and remove the nut with the breaker bar.
3. Smear a thin layer of grease onto the face of the nut.
4. Thread the nut back onto the axle and torque it to 180 ft-lbs.
5. Tighten the nut 60° past the point you’ve just torqued the nut to, using the breaker bar.
6. Replace the centre cap back on and your’re done.
Please subscribe My chanel for more wonderfull and Useful tips..