Metric Size Socket Set Screws
Thread Size: M1.4-M52
DIN913, DIN914, DIN915, DIN916
ISO4026, ISO4027, ISO4028, ISO4029
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
Tifalloy fasteners have a higher tensile strength than standard Grade 8 fasteners, and they provide superior clamping force and safety margins in MRO installations.
https://www.tifco.com
WARNING READ THIS FIRST On How to adjust hammer pressure remove anti tamper adjust power both up/down with chrony and reset rifle to how it legally should be UK under 12 ft lbs
(Remove Locking Anti tamper grub screw when HOT 3.12 in video
CARE NEEDED to break threadlock on grub screw end only avoid any heat on spring
KEEP WELL AWAY FROM SPRING END)
Use 8mm threaded filed end tapered bolt or similar to remove Hammer Sleeve Adjuster Screw 3,59 in video by
turning down clockwise to remove it completely if required (close up of bolt used 5.44)
Warning Do not attempt any of this if you have no EXPERIENCE of working on PCP Air Rifles
Refit grub screw after Chrony Set up to your required Legal Limit and Lock
Clockwise to increase
Anti clock to decrease
If your Weihrauch HW100 has crept over/under and is still in warranty return it back to your supplier to remedy as this will void your warranty if you attempt any of the above as it is intended
ONLY FOR EDUCATIONAL PURPOSES
Fully Degrease and apply a light coat of light oil to hammer and guide
This video together with the Excellent Sebastian Hibbert video`s
on the subject will explain it all simply for you
IMPORTANT
To gain the full benefit regarding hammer spring pressure adjustment and fine tuning
you need to set the REGULATOR pressure to suit your own particular calibre of rifle .177 .22 etc
(On my particular Rifle it came out best at 92 bar in .22 calibre and fine tuned via the hammer to give a decent shot count)
Take care and
Be Lucky