Factory wholesale EN 14399-4 and 8 Structural Bolt Set for Proloading Supply to Ecuador

Product Detail

BS EN 14399-4 and 8 System HV Structural Bolt Set for Preloading DIN EN 14399-4 and 8 System HV Structural Bolt Set for Preloading Thread Size: M12-M36 with various length Grade: Bolt-10.9, Nut-10, Washer-300~370HV Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive price, Timely delivery; Technical support, Supply Test Reports Please feel free to contact us for more details.

Product Tags

Hex Head Screw Extractor

Hex Nuts Catapult

Metric Size Structural Bolts to America

Set Idle Mixture Screws Vacuum Gauge

Spring Lock Washers for Pakistan

Threaded Rod Quick Release

Factory wholesale EN 14399-4 and 8 Structural Bolt Set for Proloading Supply to Ecuador Related Video:

Photography lighting kit and Softbox lighting kit, cheap Ebay JULIUS STUDIO Photo/Video Lights Review

Here is a Follow up Video I did on these after using them for 2+ years: https://youtu.be/wGRevnr0XJc

Advertise and Video Spencers can hire me on my bands Famebit: https://fbit.co/u/FansofJimmyCentury

Please “NOTE” I Have no affiliate with Ebay or the sellers selling these lights. I just picked up a set and think if you need something cheap, these will do the trick, here is a link to the seller I got my set from: https://goo.gl/Vkh63o

Subscribe to our chan:

https://www.youtube.com/subscription_center?add_user=lasvegasvideoservice

link to $1 Lav Mic video:

</amp-iframe></p> <p>find me on twitter: https://twitter.com/LVvideopro</p> <p>===========================<br /> Sepc off Ebay</p> <p>3 x JULIUS STUDIO Light Holder with Softbox Reflector </p> <p> • Made of high quality nylon<br /> • Size: 24″ x 24″ large soft box<br /> • Ultimate soften light stream and remove shadow to make perfect shooting<br /> • Uses Max Up to 85W E26 Light Bulb<br /> • Code & Plug included (9 ft.)<br /> • Color: Black/Silver (Out/In)<br /> - Silver Internal Face: Minimize Light Loss & Maximize Light Spread<br /> • 2 Levels Light Control Available<br /> - 1. Soft Box Only<br /> - 2. Soft Box + External White Cover</p> <p>2 x JULIUS STUDIO 7ft Tall Alumium Studio Quality High Output Light Stand </p> <p> • This Alumium Stand is lightweight for easy placement.<br /> • It’s compact enough for travel and carry.<br /> • to hold most Lights and Equipments.<br /> • Made from aluminum alloy with a professional black satin finish.<br /> • Light Weight : Easy to Move (Aluminum)<br /> • Solid Safety 3 Legs Stages<br /> • Indutrial Standard Mounting Stud<br /> • Solid Locking System for Light Safety<br /> • Height adjustable Min 30″ – Max 86.5″ (7ft.)</p> <p>1 x JULIUS STUDIO Photo Video Studio Boom Stand & Sandbag Combo </p> <p> • Material: Aluminum Alloy Construction<br /> • Solid Safety 3 Legs Stages<br /> • Easy Quick-release Lever System<br /> - Precise height control available<br /> • Light Weight: Easy to Move<br /> • Indutrial Standard Mounting Tip: 3/8 thread tip<br /> - Works with most of Flash/Strobe Light, Umbrella, Reflectors<br /> • Solid Locking System for Light Safety<br /> • Lenght of Arm : Min 30″ – Max 55″<br /> • Lenght of Tripod : Min 30″ – Max 88″</p> <p>Lenght of Arm<br /> : Mim 30″ – Max 55″<br /> Thickness of Arm<br /> : 1″<br /> Section of Arm<br /> : 2<br /> Length of Tripod<br /> : Min 30″ – Max 88″<br /> Thickness of Tripod<br /> : 1″<br /> Max. Load Capacity<br /> : 2.5LB<br /> Weight Balance Include</p> <p>12 x Premium JULIUS PRO STUDIO Day-Light Studio Light Bulb </p> <p> • Energy Saving Compact Fluorescent Spiral Bulb<br /> - Saves energy up to 80%<br /> • Base : E26 Base (Regular Screw)<br /> • Color Temperature: 6500K<br /> • Watts: 45W<br /> - 45 watt x 1 compact fluorescent 200 watt equivalent<br /> • Style: Spiral<br /> • Lamp Tone: Day Light<br /> • Overall Diameter: 3”<br /> • Overall Length: 8”</p> <p>3 x Premium Quality 4 IN 1 / Four Socket Adapter for Light Bulbs</p> <p> • UL Approved<br /> • Material : Porcelain<br /> • Four Heads Photo Lighting Holder Universal<br /> • 4 Bulbs installed in 1 single socket at the same time<br /> • The location on lighting holder for photo Soft Box<br /> • Cable length : 75″<br /> • Operated with 4 Day-light Studio Light Bulbs<br /> • Work with 110 – 120V<br /> • Bulb not included</p> <p>1 x JULIUS STUDIO Exclusive Premium Carry Bag </p> <p> • Custom Designed for JULIUS STUDIO Kit<br /> • All-in-One Bag and Move your Studio<br /> - Store Muslin Stand, Umbrellas, Muslins, Lights, even your Camera*<br /> * Light Bulbs may be carried seperately<br /> • Durability: Made of High Quality Material<br /> - Durable Premium 600D Oxford Nylon<br /> - Heavy Duty: Support up to 80 Lbs<br /> - Reinforced Seams<br /> • Water Resistant </p> <p>What is included?</p> <p>(3) Light Holder with Softbox Reflector (24″ x 24″)</p> <p>(2) 7ft Tall Alumium Studio Quality Light Stand</p> <p>(1) Studio Boom Stand & Sandbag Combo</p> <p>(3) 4 IN 1 / Four Socket Adapter for Light Bulbs</p> <p>(12) 45W Day-Light Studio Light Bulb</p> <p>(1) Exclusive Premium Carry Bag</p> <p><amp-iframe width="360" height="180" sandbox="allow-scripts allow-same-origin" layout="responsive" frameborder="0" src="https://www.youtube.com/embed/NpQEYXrF4Dc" ></amp-iframe><br /> <br />Learn how to install a SnowSport snow plow and benefit from it next time it snows! Go to https://www.realtruck.com/snowsport-hd-utility-snow-plow/ to learn more. The SnowSport HD Utility Snow Plow mounts easily using a 2″ front or rear receiver hitch. </p> <p>877-216-5446</p> <p>https://www.RealTruck.com</p> <p>How to Install a SnowSport HD Utility Snow Plow<br /> Video Transcript:</p> <p>This video is to be used in conjunction with your owner’s manual, to help you with the assembly and mounting of your new SnowSport HD plow. You will need a receiver plow mount hitch installed on your vehicle before starting the plow assembly. Follow the written instructions for the mount kit for your particular model of truck.</p> <p>Next, you will want to gather the tools showing on the list: Torque wrench, impact or ratchet with 9/16″ and ¾” socket, drill with 3/16″ and 5/16″ drill bits, #3 Phillips driver bit, ¾” box wrench, 5/16″ open end wrench, 3/16″ Allen wrench, bubble level and protective eyewear. Make sure your vehicle is parked on a level grade and you’re ready to get started.</p> <p>Step 1: Insert interceptor into receiver and secure with the hitch pin. The interceptor can be installed with the big leg turned either up or down as needed for proper push frame clearance (showing turned up in this video). Bolt the push frame to the proper hole pattern on the interceptor, using four ½” x 4″ bolts with flat washers and lock nuts. Leave bolts snug tight for now.</p> <p>Step 2: With the bolts snug tight, level the push frame horizontally. Then check push frame for vertical plumb. If plumb, tighten all 4 bolts and proceed. If not plumb, refer to the shimming procedure in step #2 of your owner’s manual. </p> <p>Step 3: Align the end of the rubber edge with the matching channel of the bottom section of the aluminum blade. Slide the rubber edge into the channel until it’s centered on the aluminum blade. Take the top half of the blade and connect the tongue and groove joint with the bottom half. Slide the top section until it’s centered on the bottom section.</p> <p>Step 4: At each end of the blade, insert 2 square nuts into each channel, flat side facing out. These nuts will be aligned with the holes at the top and bottom of the slide hinges. Place each slide hinge on the blade and align the edge of the hinge with the factory mark on the blade. When both hinges are properly aligned, they should measure 22-1/2″ apart. Turn the 3/8″ x ¾” hex bolts with flat washers into the nuts that were previously slid into the channels on both the top section of the blade and the bottom section of the blade. Double check to make sure each slide hinge is lined up with the factory mark. Then, tighten the hex bolts on the top section first. Then tighten the hex bolts on the bottom section. Using a 5/16″ bit, drill a hole through the blade in each factory punched hole on the slide hinge. Turn a 3/8″ x 1″ self-threading bolt into each drill down hole and tighten.</p> <p>Step 5: At the tongue and groove joint drill a 5/16″ pilot hole at the factory mark in the “V” groove at each end of the blade. For a 96″ wide blade, there will be an extra hole drilled and bolt installed per side (see step #6 in your owner’s manual). Turn a 3/8″ x 1″ self-threading bolt into each pilot hole and tighten. Using a torque wrench, tighten all 6 bolts in each slide hinge to 31 foot pounds.</p> <p>Step 6: At the bottom of the blade, double check that the rubber edges centered. Then, using a 3/16″ bit drill a pilot hole that each of the 4 factory marks in the “V” groove. Be sure to only drill through the first layer of aluminum and into the rubber. Using a #3 Philips bit, run a self-drilling screw into each of the 4 pilot holes; this prevents the rubber cutting edge from moving. </p> <p>Step 7: Now hang the blade on the push frame in the transport position and insert the keyhole pins. Insert 2 square nuts into the top channel. With a hex nut turned onto the stud of the blade marker, align the blade marker with the hole on the lift handle and bolt the marker and handle to the blade. Using one of the square nuts in the channel, turn a 3/8″ x ¾” bolt into the other hole on the handle and thread it into the second nut that was slid into the channel. With the handle flush with the blade edge, tighten both bolts connecting the lift handle to the blade. Repeat at the other end.</p> <p>Step 8: Attach the rubber box end to the blade using the metal cap plate and four 3/8″ x 2-1/2″ self-threading bolts. Tighten these bolts until the rubber end begins to compress to the blade. Insert a 5th bolt to tighten the bottom of the rubber end to the bottom of the metal cap plate. Secure this bolt with a flat washer and lock nut. Tighten all bolts equally and repeat at the other end. </p> <p>The installation of the plow is now complete and your plow is ready for the winter season.</p> </div> </amp-selector> <div class="carousel-parent related-product"> <h2 class="related-title">Related Products</h2> <amp-carousel class="carousel-component" height="320px" layout="fixed-height" type="carousel"> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/factory-directly-supply-astm-a320-l7m-all-threaded-stud-bolts-wholesale-to-yemen.html"> <amp-img src="https://www.ds-metalworks.com/uploads/a320-l7m-all-thread-stud-bolts.jpg" layout="fill" alt="Factory directly supply ASTM A320 L7M All Threaded Stud Bolts Wholesale to Yemen"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/factory-directly-supply-astm-a320-l7m-all-threaded-stud-bolts-wholesale-to-yemen.html" class="item-title">Factory directly supply ASTM A320 L7...</a> </div> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/wholesale-dealers-of-brass-tip-socket-set-screws-for-manila-manufacturer.html"> <amp-img src="https://www.ds-metalworks.com/uploads/121.jpg" layout="fill" alt="Wholesale Dealers of Brass Tip Socket Set Screws for Manila Manufacturer"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/wholesale-dealers-of-brass-tip-socket-set-screws-for-manila-manufacturer.html" class="item-title">Wholesale Dealers of Brass Tip Socke...</a> </div> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/a194-7m-heavy-hex-nuts-price-astm-a320-l7m-all-threaded-stud-bolts-dingshen-metalworks.html"> <amp-img src="https://www.ds-metalworks.com/uploads/a320-l7m-all-thread-stud-bolts.jpg" layout="fill" alt="A194 7M Heavy Hex Nuts Price - ASTM A320 L7M All Threaded Stud Bolts – Dingshen Metalworks"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/a194-7m-heavy-hex-nuts-price-astm-a320-l7m-all-threaded-stud-bolts-dingshen-metalworks.html" class="item-title">A194 7M Heavy Hex Nuts Price - ASTM ...</a> </div> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/8-year-exporter-astm-a325m-8s-heavy-hex-structural-bolts-export-to-san-diego.html"> <amp-img src="https://www.ds-metalworks.com/uploads/astm-a325m-8s-heavy-hex-structural-bolts.jpg" layout="fill" alt="8 Year Exporter ASTM A325M 8S Heavy Hex Structural Bolts Export to San Diego"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/8-year-exporter-astm-a325m-8s-heavy-hex-structural-bolts-export-to-san-diego.html" class="item-title">8 Year Exporter ASTM A325M 8S Heavy ...</a> </div> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/high-definition-wholesale-astm-a193-a320-b8-threaded-stud-bolts-supply-to-doha.html"> <amp-img src="https://www.ds-metalworks.com/uploads/b8.jpg" layout="fill" alt="High definition wholesale ASTM A193 A320 B8 Threaded Stud Bolts Supply to Doha"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/high-definition-wholesale-astm-a193-a320-b8-threaded-stud-bolts-supply-to-doha.html" class="item-title">High definition wholesale ASTM A193 ...</a> </div> <div class="product-item"> <div class="item-img"> <a href="https://m.ds-metalworks.com/professional-factory-for-din127b-spring-lock-washers-to-russia-manufacturer.html"> <amp-img src="https://www.ds-metalworks.com/uploads/din127b-spring-lock-washer.jpg" layout="fill" alt="professional factory for DIN127B Spring Lock Washers to Russia Manufacturer"></amp-img> </a> </div> <a href="https://m.ds-metalworks.com/professional-factory-for-din127b-spring-lock-washers-to-russia-manufacturer.html" class="item-title">professional factory for DIN127B Spr...</a> </div> </amp-carousel> </div> </div> </section> <footer class="page_footer"> <div class="footer-item footer-contact"> <h3 class="title">Contact Us</h3> <ul> <li class="foot-phone">Phone: <a href="Tel:+86-574-86521558">+86-574-86521558</a></li> <li class="foot-email">E-mail: <a href="mailto:sales@ds-metalworks.com">sales@ds-metalworks.com</a></li> <li class="foot-whatsapp"><a href="/featured/">Featured Products</a></li> </ul> </div> </footer> </body> </html>