www.miamistainless.com.au – Learn how to install our most popular DIY wire balustrade system for metal posts with this animated video.
Script
The Nutsert Swage Stud System designed in house and patented by Miami Stainless is our streamline and easy-to-install stainless steel wire balustrade system for metal posts.
To install, mark out and drill all of your posts at the required spacing and hole size. This system requires a 10mm hole in end posts and a 7.5mm hole in intermediate posts.
Use the HN-02 nut rivet tool to insert the left and right hand nut rivets into the pre-drilled posts.
With your pre-fabricated wires, wind the right hand swage stud into the right hand nut rivet. Only screw the swage stud 2 turns into the nut rivet.
Remove the hex nut on the opposite swage stud and pass the wire through pre-drilled intermediate posts.
Wind the left hand swage stud anti clockwise into the left hand nut rivet and take note that the other end is rotating and tensioning at the same rate.
Continue to wind by hand at either end until the wire is mostly tensioned then complete using the ProRig Multi Tool.
Lock the system in place by tightening the hex nuts against the head of the Nut rivets.
Repeat to finish your installation.
It can remove and tight the following Fasteners within the range of 7 to 19mm or 1/4″ – 3/4″
• Hexagonal bolts/nuts
• Square/flat head bolts/nuts
• Eye-Bolts
• Cup-hooks
• U-Bolts
• Damaged/Rusted bolts/nuts etc.
Features
It has made of a hardened 54 steel pins with long lasting strength and has an industrialized finish. Once the socket put onto a fastener, the middle pins retract and the pins on the outside surrounds on the fastener. When the fastener is turned with the socket, the torque is sent out through pins on the outside to the wall of the socket. In other words, the socket instantly adjust to hold various types of fastenes.
Combined with an adapter for power tool – extra force & a handle. – set includes total 3 pieces.
Benefits
This recently invented Single Socket Wrench can replace 13 standard wrenches/sockets between the given range – instantly adjusts to any shapes which makes the socket a useful option for professional and personal use.
What about the tools to hold Wing-Nuts, U-Cups, Eye-Bolts, Square bolts, etc., for the given range?
- One socket means light weight.- Can save TIME and MONEY.