ASTM A194/A194M 2HM Heavy Hex Nuts
API 6A Flange Valve Wellhead Heavy Hex Nuts
Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D
Inch Size: 1/4”-4”
Metric Size: M6-M100
Other Available Grade:
ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on.
Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
ASTM A194
The ASTM A194 specification covers carbon, alloy and stainless steel nuts intended for use in high-pressure and/or high-temperature service. Unless otherwise specified, the American National Standard Heavy Hex Series (ANSI B 18.2.2) shall be used. Nuts up to and including 1 inch nominal size shall be UNC Series Class 2B fit. Nuts over 1 inch nominal size shall be either UNC Series Class 2B fit or 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the marketplace and are often substituted for ASTM A563 grade DH nuts due to the limited availability of DH nuts in certain diameters and finishes. Grades| 2 | Carbon steel heavy hex nuts |
| 2H | Quenched & tempered carbon steel heavy hex nuts |
| 2HM | Quenched & tempered carbon steel heavy hex nuts |
| 4 | Quenched & tempered carbon-molybdenum heavy hex nuts |
| 7 | Quenched & tempered alloy steel heavy hex nuts |
| 7M | Quenched & tempered alloy steel heavy hex nuts |
| 8 | Stainless AISI 304 heavy hex nuts |
| 8M | Stainless AISI 316 heavy hex nuts |
Mechanical Properties Grade Identification Markings
| Grade Identification Marking5 | Specification | Material | Nominal Size, In. | Tempering Temp. °F | Proof Load Stress, ksi | Hardness Rockwell | See Note | |
| Min | Max | |||||||
| ASTM A194 Grade 2 | Medium Carbon Steel | 1/4 - 4 | 1000 | 150 | 159 | 352 | 1,2,3 | |
| ASTM A194 Grade 2H | Medium Carbon Steel, Quenched and Tempered | 1/4 - 4 | 1000 | 175 | C24 | C38 | 1,2 | |
| ASTM A194 Grade 2HM | Medium Carbon Steel, Quenched and Tempered | 1/4 - 4 | 1000 | 150 | 159 | 237 | 1,2,3 | |
| ASTM A194 Grade 4 | Medium Carbon Alloy Steel, Quenched and Tempered | 1/4 - 4 | 1100 | 175 | C24 | C38 | 1,2 | |
| ASTM A194 Grade 7 | Medium Carbon Alloy Steel, Quenched and Tempered | 1/4 - 4 | 1100 | 175 | C24 | C38 | 1,2 | |
| ASTM A194 Grade 7M | Medium Carbon Alloy Steel, Quenched and Tempered | 1/4 - 4 | 1100 | 150 | 159 | 237 | 1,2,3 | |
| ASTM A194 Grade 8 | Stainless AISI 304 | 1/4 - 4 | - | 80 | 126 | 300 | 4 | |
| ASTM A194 Grade 8M | Stainless AISI 316 | 1/4 - 4 | - | 80 | 126 | 300 | 4 | |
| NOTES: 1. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock, the nut must additionally be marked with the letter 'B'. The letters H and M indicate heat treated nuts. 2. Properties shown are those of coarse and 8-pitch thread heavy hex nuts. 3. Hardness numbers are Brinell Hardness. 4. Nuts that are carbide-solution treated require additional letter A - 8A or 8MA. 5. All nuts shall bear the manufacturer’s identification mark. Nuts shall be legibly marked on one face to indicate the grade and process of the manufacturer. Marking of wrench flats or bearing surfaces is not permitted unless agreed upon between manufacturer and purchaser. Nuts coated with zinc have an asterisk (*) marked after the grade symbol. Nuts coated with cadmium shall have a plus sign (+) marked after the grade symbol. 6. Other less common grades exist, but are not listed here. Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. N-80 - N-81. | ||||||||
| Element | 2, 2H, and 2HM | 4 | 7 and 7M (AISI 4140) | 8 (AISI 304) | 8M (AISI 316) |
|---|---|---|---|---|---|
| Carbon | 0.40% min | 0.40 - 0.50% | 0.37 - 0.49% | 0.08% max | 0.08% max |
| Manganese | 1.00% max | 0.70 - 0.90% | 0.65 - 1.10% | 2.00% max | 2.00% max |
| Phosphorus, max | 0.040% | 0.035% | 0.035% | 0.045% | 0.045% |
| Sulfur, max | 0.050% | 0.040% | 0.040% | 0.030% | 0.030% |
| Silicon | 0.40% max | 0.15 - 0.35% | 0.15 - 0.35% | 1.00% max | 1.00% max |
| Chromium | 0.75 - 1.20% | 18.0 - 20.0% | 16.0 - 18.0% | ||
| Nickel | 8.0 - 11.0% | 10.0 - 14.0% | |||
| Molybdenum | 0.20 - 0.30% | 0.15 - 0.25% | 2.00 - 3.00% |
Transforming your truck has never been easier with Rough Country’s 1.5 to 2.5-inch Lift Kit for 1999 to 2006 Chevrolet Silverado and GMC Sierra 1500 Pickup Trucks. Get everything you need to run up to 32-inch tires with factory backspacing and gain the aggressive good-looks of a lifted truck with a taller stance – all in one easy to install package.
A set of high-quality Forged Torsion Keys allow fine-tuning of the torsion bar to lift the front of the vehicle. Lifting the truck 1.5-inches retains a factory-like rake while raising the front the full 2.5-inches results in a more level stance. These keys are considerably stronger than cast-iron, offering plenty of strength to keep everything locked in place and a set of 3-inch rear blocks and shock spacers help provide ample room for a wider range of options lesser kits can’t offer.
This kit features Rough Country’s premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
With our 100% bolt-on installation processes, this kit is easy enough to install on your own or save you money on installation at your local shop. Best of all, this kit is backed by Rough Country’s Lifetime Replacement Warranty and 100% Satisfaction Guarantee.
Also fits the 2007 Chevrolet Silverado 1500 Classic and 2007 GMC Sierra 1500 Classic
Get yours at https://www.roughcountry.com/gm-leveling-lift-kit-283n2.html
Torsion Bar Removal Tool https://www.roughcountry.com/torsion-bar-removal-tool-1067.html
Ahora me gustaría enfatizar que diferencia hay entre perno hexagonal y …
Primeno, no hay cara con arandela arriba de la cabeza de perno hexagonal y si la hay arriva de la cabeza del tornillos de casquete
Segundo, los grados de perno hexagonal son ASTM A307 Gr.A.
Éste es A307 Gr.A, este es nuestra marca JM, pueden tener su marca aquí.
Los grados de tornillos de casquete son SAE J429 Gr.2, Gr.5 &Gr.8
Este es Gr.5 y este es Gr.8
Shanghai Jian&Mei es una empresa profesional que produce pernos, nuestro productos son aplicados principalmente en las areas Acero estructural, Edificio metal, Petróleo&Gas, Torre&Polo, Viento, Energía, Máquina mecánica, automóvil, Decoración etc.
Ofrecemos todos los tamaños.
El material sería acero al carbono, acero de aleación, acero inoxidable y cobre.
Grados disponibles de pernos son SAE J429 Gr 2,5,8, ASTM, A307,A490,ASTM A193 B7 and class 4.8 6.8 8.8,10.9,12.9,
El acabado sería Zinc, Zinc amarillo, Óxide negro, HDG etc.
Exportamos Perno hexagonal & Tornillos de casquete con alta calidad al mercado américa más de 8 años y nos disfrutamos muy bueno reputación, somos su prroveedor reliable de elementos de sujeción.
No duden en contactarno en cualquier momento.
Shanghai Jian & Mei Industry and Trade Co., Ltd
Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C, Code:200126
Tel: 0086-21-33328690-8058
Fax: 0086-21-68413263
English Web：www.jm-industry.com Websit: https://www.jmtornillo.com
Contact: Mrs.Xarella Huang
Email: Jminfo@jm-industry.com
Websit: https://www.jm-industry.com