www.miamistainless.com.au – Learn how to install our most popular DIY wire balustrade system for metal posts with this animated video.
Script
The Nutsert Swage Stud System designed in house and patented by Miami Stainless is our streamline and easy-to-install stainless steel wire balustrade system for metal posts.
To install, mark out and drill all of your posts at the required spacing and hole size. This system requires a 10mm hole in end posts and a 7.5mm hole in intermediate posts.
Use the HN-02 nut rivet tool to insert the left and right hand nut rivets into the pre-drilled posts.
With your pre-fabricated wires, wind the right hand swage stud into the right hand nut rivet. Only screw the swage stud 2 turns into the nut rivet.
Remove the hex nut on the opposite swage stud and pass the wire through pre-drilled intermediate posts.
Wind the left hand swage stud anti clockwise into the left hand nut rivet and take note that the other end is rotating and tensioning at the same rate.
Continue to wind by hand at either end until the wire is mostly tensioned then complete using the ProRig Multi Tool.
Lock the system in place by tightening the hex nuts against the head of the Nut rivets.
Repeat to finish your installation.
Websit: https://www.jm-industry.com
4 FINS under the head of timber bolt with grade of ASTM A307 Gr.A and H.D.G or plain finish.
Now I would like to introduce our timber bolt.
The timber bolt are mainly used for Forest products such as wood pallet etc.
The timber bolts we manufactured before are size from 5/8” to 1 1/2”with grade of ASTM A307 Gr.A and H.D.G or plain finish.this is the Hot-Dip Galvanized finished timber bolt , and this is ASTM A307 Gr.A, and this the manufacture head mark “JM”.
And you can find there are 4 FINS under the head of timber bolt, again the timber bolts with two fins is always availiable for you, too.
Shanghai jian & mei is a pofessional manufacturer of bolt products,our products are mainly applied in Structural Steel,Metal Buliding,Oil&Gas,Tower&Pole,Wind,Energy,Mechanical Machine,Automobile,Home Decorating and so on.
We keep full rang sizes.
the Materials could be Carbon Steel, Alloy Steel, Stainless Steel and Brass.
Availiable Grade of bolts could be SAE J429 Gr2, 5, 8,ASTM A325,A307,A490,ASTM A193 B7 and class 4.8 6.8 8.8,10.9,12.9,
The finish could be Zinc Plated,yellow zinc plated,Black oxide, H.D.G and so on.
we export quality timber bolts to American market for more than 8 years and enjoyed very good reputation,we are your reliable fastener supplier!
Wecome to contact us any time!
Shanghai Jian & Mei Industry and Trade Co., Ltd
Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C, Code:200126
Tel: 0086-21-33328690-8058
Fax: 0086-21-68413263
Web：www.jm-industry.com
Contact: Mrs.Xarella Huang
Email: Jminfo@jm-industry.com
Websit: https://www.jm-industry.com