Metric Size Socket Set Screws
Thread Size: M1.4-M52
DIN913, DIN914, DIN915, DIN916
ISO4026, ISO4027, ISO4028, ISO4029
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
HI Everyone: Received a request on how to adjust a steering box.This video shows how to properly adjust your steering box. You turn the adjusting screw clockwise to tighten the box. Always check for notes or procedure on all vehicles, on Mercedes you loosen the locknut and turn the adjusting screw counter clockwise to tighten the steering. On Domestic and Asain vehicles you turn clockwise. On vehicles that don’t have power steering there will usually be a fill or vent plug you remove to make sure the box has the correct amount of fluid in it before making any other adjustments. On most vehicles you should not tighten the adjustment more than one and a half turns. For more information be sure to visist: https://www.johnsadlersautorepair.com
• 120-200 Parts per Hour
• Hydraulic Drive of Forming Roll Forward/Reverse
• PLC Control with Touch Panel Operator Interface
• Rapid Part Cycle 2-4 Parts per Minute
• Vacuum Lift Material Feed Conveyor
• Pneumatic In-Feed Table with Material Squaring Arms
• Pneumatic Part Ejector
• Capacity Range up to 96 Inches in Forming Length
• Thickness Ranges .010 – .250 inch
• Designed to Operate 24/7