Stainless Steel Set Screws Grub Screws
Metric Size: M1.4 - M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
Todd (Damin69) Customized Shapeoko 2
Since I created this Video I have upgraded my Stepper Motors to 282oz Nema 23 steppers.
36V 11A Power supply and 9mm Wide Belts.
Base Frame is made up of 1″x1″ Square steel tubs that have 3/8″ bolt levelers.
On top of that base is the frame made of 20×40 Extrusions.
On the extrusions I have put down 3/4″ Birch Plywood. Then on top of the ply I have added strips of 3/4″ MDF for my Waste board. In between each strip is an Aluminum T-Track that works with standard 1/4-20 bolts.
My Shapeoko is 1800×1000.
Each 1800 Makerslide has been reinforced with a piece of 20×40 1800 long extrusion bolted together. Then I have mid span supports every 600mm.
My Gantry is 1000mm and is made up of 2 1000mm makerslides with a 20×40 1000mm long extrusion bolted together.
My Z axis has been upgraded to the ACME Screw and belt drive kit.
Electronics:
I opted to solder all of my wiring instead of terminal blocks.
I am running Nema 23 driver motors on all 3 axis.
all of my wiring is ran through drag chain.
I am using a C-10 Breakout board with 4 SainSmart CNC Micro-Stepping Stepper Motor Driver 2M542 Bi-polar 2phase 4.2A Switch
I have standard Micro Limit Switch Long Hinge Roller Arm SPDT Snap Action on all 3 axis.
I have made a Auto Z Touchplate that is used also.
My Makita Router speed is controlled manually right now. I am using a Solid State Relay that is controlled by the Breakout board and turned on and off through software.
I also use a Keedox® CNC 3 Axis Electronic Wireless USB Handwheel Pulse Generator MPG Pendant from Amazon https://www.amazon.com/gp/product/B00HUIPFMS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
For my Controller I am using Mach3.
List of most of the parts used and where I got them
20×20 and 20×40 extrusions, Drag Chain, Shielded Wire from Inventables.
extrusion nuts (tnuts) and Various M5 size from Open Builds and Inventables
90mm M5 Bolts used on Gantry Carrage were purchased from Fastenal
ACME upgrade, Belt Drive Kit and Midspan Brackets from Shapeoko.com
SainSmart Drivers from Amazon https://www.amazon.com/gp/product/B00DFSF9GE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Roller Micro Switches, Estop, Solid State Relay from Amazon
C-10 Breakout board, 120V outlet, Fuse holder from CNC4PC.com https://www.cnc4pc.com/Store/osc/product_info.php?cPath=33&products_id=45
Case used for my controler enclosure is an INWIN full tower that I had laying around.
Makita RT0701C From Amazon
Led Strips inside Dust Shoe is from Walmart