Mike(Bullitt on GB) sent a few of these down my way and got them today, so wrapped one up to see how it felt(1st time ever trying one). Felt pretty darn good =)…… Thanks Again Mike! I guess the same ones he bent cal’d from Eric at 500 or so.
In today’s detailed vlog CAPINC’s Stratasys Applications Engineer, Dave Belanger shows you step-by-step how to insert a hex bolt into a Fused Deposition Modeling (FDM) 3D printed part. From start to finish Dave goes over how he models the bolt in SOLIDWORKS and then brings the model into the Insight software and prepares it to print on the Fortus 250, demonstrating in detail the proper procedure to stop the model for the bolt to be inserted during print.
For more technical tips visit: https://blog.capinc.com