*For a Dynamic Pivot assembly, ensure that the large washer is secured between the pivot arm and nub and that the smaller washer is placed on the outside of the arm, between the bolt. For more information, please refer to the 80/20 Product Catalog:
80/20 Inc: Pivot Assembly Overview
https://www.youtube.com/watch?v=-WuOdNVn87g&feature=youtu.be
Hello, and welcome to 80/20′s product highlight series. Today we’re going to take a look at the structural pivots. This connection method allows bars to be positioned along a wide variety of angles. They’re easy to install and are available in both fractional, metric, and are compatible across a wide range of profile series.
Now when it comes to using the structural pivot, you have a few options to choose from. The first choice is how you receive your part. The structural pivot can be purchased as stand-alone parts, or as a preassembled part, ready to install, as seen here. Now the next thing you’ll want to consider is the alignment of the pivot nub, and how it sits on the profile. The nub comes in two styles, you have the 90 degree and you have the 0 degree, the only difference being the orientation to the bar.
Now regardless of your choices, the pivot nub will need additional bolt assemblies for mounting. More information on 80/20′s recommended bolt assemblies can be found in the 80/20 product catalog. Now when it comes to installing the structural pivot, the first thing you’ll want to do is preload your hardware. Preloading not only makes it easier to install your structural pivot, but also saves time during assembly. Now the first thing I’m going to do is take the structural pivot and put one last bolt and one last T-nut in it. It’s important to know when you’re installing your T-nuts, to have the pilot projection facing downwards. Once we have that ready to go, we’ll take our first bar, and slide the pivot nub right onto it. Once we’ve found our location we’ll take our wrench, and tighten that into place. From there we are ready for our next bar, and we’ll slide it right onto the arms of the structural pivot. We’ll take our wrench and tighten down that hardware.
Now the last thing we’ll want to do is find the angle that we want our bar at. Once we’ve found that we’ll tighten down the pivot bolts. Now hopefully you found this segment on the structural pivot helpful. For more information, visit 8020.net and make sure to subscribe to future 80/20 videos, and as always, make it a great day.
https://www.youtube.com/watch?v=-WuOdNVn87g&feature=youtu.be
80/20 Inc: Pivot Assembly Overview
DIESEL Mr. Daddy 2.0 IP Brown Leather Men’s Watch DZ7314 is perfect for super large watches lovers. The finish is excellent with polished, brushed and knurled textures on the stainless steel and textured leather band. Stainless steel case is accented with 4 sets of silver-tone stainless steel screws. Oversized crown comes handy and easy to use. Chronograph buttons are fun to operate with easy access and smooth, quick reaction. Dial of DZ7314 is navy blue pyramid textured with silver-tone plate detailing all around and a pop of red color. Yes, this watch has four separate time zones with main movement featuring chronograph and date window at 3 o`clock. Markers are stick indices and Arabic numerals. Main dial has red spell out markers at 12, 1 and 2 o’clock. Dial is protected with scratch-resistant mineral crystals. Strap is brown textured leather with buckle closure. ©