This video shows the process for removing the old unusable bolts and replacing them with new wedge anchor bolts in preparation for receiving a new Delphi Speaker Post
I have bypassed a lot of the electrical system. The cart has spark setup on a seperate switch, and this works that is not the issue. There is no selenoid, the switch is setup like a selenoid. It is a push button. There is power from the battery going in one side of the switch, and when you press the button it conducts power to the hot terminal of the starter. The starter/generator has a loose ground cable as seen in the video that goes directly to the – terminal of the battery. The S/G has a red cable that goes from near the ground to the back side. Trying to figure out if it is a compression issue or a electrical or a starter issue.
Thanks