How to replace the shaft seal on a KM pump
00:13 Step1. Remove the bearing cap
00:23 Step2. Remove the grease
00:29 Step3. Remove the lock washer and the shaft nut
00:57 Step4. Remove the bearing housing
01:50 Step5. Remove the retainer ring
02:12 Step6. Remove the used shaft seal
02.29 Step7. Mount the new shaft seal
02:42 Step8. Clean the sealing surface carefully
02:50 Step9. Mount the carbon ring in the container ring
03:02 Step10. Clean the sealing surface of the carbon ring
03:07 Step11. Mount the retainer
03:34 Step12. Remove the rear cap and the bearing from the bearing housing
03:52 Step13. Mount the rear cap again loosely
03:59 Step14. Mount the bearing housing
04:45 Step15. Mount the bearing
05:09 Step16. Mount the shaft nut and the lock washer
05:25 Step17. Mount the bearing cap loosely
How to line up the rotor
05:38 Step1. Make sure that the four bolts in the front bearing cap are tighten
05:43 Step2. Place a precision clock on the shaft
05:58 Step3. Force the rotor back until it makes contact with the rear flow plate
Now the rotor has contact with the flow plate and cannot be turned by hand
06:24 Step4. Loosen the bearing cap again
06:43 Step5. Reset the clock (O)
06:59 Step6. Force the rotor forward until it makes contact with the front flow plate
07:13 Step7. Make sure that the rotor has contact with the front flow plate
07:18 Step8. Note the rotors total moving space
In the case 0.36 mm
07:41 Step9. Move the rotor back again and ensure the equal space in both ends of the rotor
In this case 0.36mm/2=0.18mm
08:12 Step10. Lock the bear bearing by tightening the flour bolts
The rotor is now centered and locked
08:31 Step11. Check that the rotor is running free
08:42 Step12. Grease the pump according to the manual
For more information please visit: https://www.samson-pumps.com
Sales-priced 2ck2dFb The flawless Gift for a friend: Castle Nuts 18-8 Stainless Steel – 3/4-16 Qty-1 in New Kensington, Pennsylvania. You can believe in on the purchase price will be lower than price in Bellevue, Nebraska. In Corson County, South Dakota, the local shops are best price for Castle Nuts 18-8 Stainless Steel – 3/4-16 Qty-1. Who own best price? You will look at: Castle Nuts 18-8 Stainless Steel – 3/4-16 Qty-1 nearby Bertie County, North Carolina.