Eambrite just sent me their Hydraulic Jack and this thing is pretty cool. The company says you could change your tire on the car in 5 minutes, I have to agree with this, it really did make everything super simple. This roadside emergency kit comes with everything you need to get your tire off on the spare on. If you don’t have a spare you can add a plug kit and then inflate your tire with this kit as well.
I lifted a 6000 lb truck with 35-inch tires, then rotated the tires with this jack, see link for video https://youtu.be/IFjUON9VTt0.
Amazon link: https://amzn.to/2ONAdsK
You can also follow us on our blog: https://www.chrisdoeswhat.com/
Or go directly to cooking: https://www.dininginwithdanielle.com
If you have a request, please see our blog and go to contact. https://www.chrisdoeswhat.com/contact-us/
Current Video & Blog Productions:
Florida Landscapes
Explore Florida
Recipes with Danielle
DIY and HowTo
Reviews
Equipment:
All videos are edited with Sony VEGAS Pro or Filmora
Our video studio does have a green screen with umbrella lighting
All recording equipment is Sony and our main camera is the HDR-CX675 offering servo steadied filming and 5.1 sound.
Affiliate Links:
- Shop Amazon at no cost to you, and helps our channel: https://amzn.to/2SMfsjS
- Shop Target at no cost to you, and helps our channel: https://goto.target.com/xkbJ1
- Easy low-cost Financial Investing:
Acorns Investment – https://www.acorns.com/invite?code=ach8rs
- Best Blog Hosting: https://www.bluehost.com/?utm_source=www.chrisdoeswhat.com&utm_medium=affiliate&utm_campaign=affiliate-link_chrisdoeswhat_notype
Music:
Intro/Outro: Elliot Berger – The Nameless
Products point：
Roadside emergency kit including Combo 2 in 1 Electric hydraulic jack with an Inflatable pump inside, Electric impact wrench, Sleeves, Glove, Battery clamp，and Storage Case
Jack rated capacity: 1 Ton (2200lbs) with lifting range 6.1 inches to 17.3 inch or 5.3 inches to 14.1 inch.
340N·M electric impact wrench with 4 sizes of sleeves is able to match most cars.
Work with 12V vehicle power outlet, and operate easily just by 2 switch
Built-in safety device prevents the jack from falling and keep current height even out of power.
Technical Details
2 in 1 Combo 1 ton electric jack with an inflatable pump inside.
2 sleeves with 4 size of #17,#19,#21,#23, suitable for most of vehicles.
Cross groove saddle prevent slipping from the vehicle.
Rotating threaded rod can be spin out up to 75mm, makes cross groove saddle closer to lifting point.
In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent the increased jack from falling and will not come down immediately. Then when re-connecting the power, jack will go on working in accordance with the instruction or using the safety valve manually to fall.
Storage case fits skid-proof tape and reflective tape. Skid-proof tape makes storage case nonskid at boot，reflective tape make storage case using as Reflective Safety Triangle.
Small size for easy storage in the boot “trunk”.
Unique design, a good gift for your friend.
Specification:
For Jack:
Input Voltage: 12VDC
Current: 13A
Fuse: 15A
Max Loading: 2200 lb (1000 kg)
Lifting Height Range: 6.1 in. -17.1 in. (155mm-440mm)
Power Cord Length: 11.4 ft. (3.5m)
Working Temperature: 5℉ ~122℉（-15℃~+50℃）
Jack Size: 12.6 in. * 7.5 in. * 6.7 in.
Weight:11.3 lb(5.15kg)
For Inflatable Pump:
Input Voltage: 12VDC
Air Flow: 9.2 gal/min (35L/min)
Working Temperature: 5℉ ~122 ℉（-15℃~+50 ℃）
Current: 10A
Max Pressure: 10BAR/150PSI
Hose Length: 23.6 in. (0.6m)
Cylinder Diameter: 25mm
Storage Case：14.8”*14.4”*7.8”
Packing Size: 15.6”*15.2”*8.6”
Weight: 21.6lb(9.8kg)/22lb(10kg)
For Impact Wrench:
Input Voltage: 12VDC
Current: 12A
Fuse: 15A
Rated Power:100W
Max.Torque:340N.M
Socket Sizes: 7/8″(23mm), 13/16″(21mm), 3/7″(19mm) and 11/16″(17mm)
Power Cord Length: 11.5 ft. (3.5m)
Working Temperature: 5℉ ~122℉（-15℃~+50℃）
Wrench Size: 10.2 in. * 3.6 in. * 5.8 in.
Packing Size:11.8in.*7.6in.*4.9in.
Weight: 3.85lb(1.75kg)
InductoScan® Modular Heat Treat Systems:
Induction Heating for Hardening and/or Tempering
Perfect for almost all types of components, the InductoScan® System has a compact design that allows for a wide range of power supplies, PLC-HMI touch screen controls and material handling components to be integrated onto a common base to better match part design and production needs.
Features & Benefits:
• Mechanical modules provide various process solutions:
Scan, lift/rotate, pick & place, linear transfer or indexing
• Self-contained, modular, standalone system:
Standard footprint: 89″W (2250mm) x 75″D (1900mm)
• Advanced Controls: PLC/HMI touch-screen. Motion Program.
Recipe Management. Trending. Data Logging. Fault Help.
• Water cooling recirculating system for inverter & coils
For addition information, visit www.inductoheat.com/inductoscan-modular-induction-heating-system.php
This video transmission, including any attachments, may contain information that is proprietary, privileged and/or confidential to Inductotherm Group and is intended exclusively for the person(s) to whom it is addressed. Any use, copying, retention or disclosure by any person other than the intended recipient or the intended recipient’s designees is strictly prohibited. If you are not the intended recipient or their designee, please notify the sender immediately by return e-mail and delete all copies.