How to make park benches from pallets
Step by step directions to make benches
and some thoughts about pallets.
Tools needed:
3 lb mallet
Steel Mallet
Wonder Bar
Claw Hammer
Ratchet Wrench with 1/4 deep socket
Reciprocating Saw (battery powered is best)
Saw Blades for Nail Embedded Wood (8-12 TPI)
Drywall hangers square
Carpenter’s Square
Combination Square
Metal Protractor to draw 15 angle
Cats Paw for removing nails
3/8″ Variable speed reversible drill
1/4″ drill bit
Combination File (rasp and file) – Wal Mart has them
Sharpie
Thick or Safety Gloves
Safety Glasses
Earplugs
Exterior Primer Paint
Exterior Paint – mix different colors to make your own new colors
Paint Brushes
Drop Cloth or tarp
Ale 8 One (Kentucky soda pop)
Materials:
8 of each:
3 1/2″ long carriage bolts, 1/4 in diameter
1/4-20 nut
1/4 flatwasher
*** Comments disabled due to constant spam from a company called Wood Pricks ****
https://www.etrailer.com/Curt/E-100.html
Today were going to review part number E-100. This is the Curt RV Bumper 2 Inch Trailer Hitch Receiver. This Curt RV bumper mount trailer hitch has a two inch square receiver opening, which is ideal for RV approved hitch accessories, such as bike racks and cargo carriers. This is intended for use on four inch square channel bumpers on the rear of many RVs and towable campers. It does have a black powder coat finish, which will resist corrosion. It does include the mounting hardware, the two carriage bolts and the two hex flange nuts.This hitch does have a weight capacity of 3,500 pounds gross towing weight capacity and a 350 pound tongue weight capacity.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.