To cut a hexagonal hole with a POP Avdel 74290 compressed air tool, you must first set the mouthpiece so that the spacing is sufficient for the cutting unit to project beyond the back of the component. Then simply insert it in the hole, press the trigger, draw it out and finally shake out the metal chips.
Using the POP Avdel 74290 compressed air tool, hexagon holes can be cut in next to no time in all those places where access is only possible from one side. The working process is extremely quick and simple. The compressed air tool with its shock-resistant plastic casing and single-stage trigger is suitable for cutting hexagon holes for blind rivet nuts from M4 to M10 in lightweight metal, steel and stainless steel sheet.
Type Rotary Washer
Manufacturer ITF
Model # 51/00299453/555/U120225
Serial # 2700/01
Style Stainless Steel
Outer Dimension See Notes
Volts 460
Amps 200.00
Tested By DR
Phase 3
Weight 8000
On Hand 1
ADDITIONAL INFORMATION
Heated Blow-Off Section
Outer dimensions: washer = 210″L x 90″W x 112″H with exhaust blower removed. Panel = 84″L x 22″W x
88″H.
– 30″ diameter drum
– Siemens Simstic OP37 controller
– Three 5 HP Sacemi pumps
– One 1/2 HP Goulds pump
– One 1/2 HP exhaust blower