1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.
https://www.maneklal.com/English/SmallScale/WireRibbingMc.htm
Machinery for making Cold Rolled Ribbed Wire / Deformed Wire for Construction
Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai 400021, India
Tel: (+91 22) 22041340 / 41 / 42
Fax: (+91 22) 22041389
e-mail: sales@maneklalexports.com
web site: https://www.maneklal.com