This is my 81 Yamaha XT500, notice the noise coming from the top-end mainly on the left side. I ended up doing the “grub screw repair” and have another video showing what it sounded like after the repair here: https://youtu.be/dvEglAbnmQY
MROTV – JOBOX Lock Installation
for more information visit: https://mrotools.com
To install a lock on a JOBOX chest, you’ll find, included in the box, an accessory kit that contains a lock retainer, a nylon spacer, an eye hook retainer pin, and a self-tapping screw. First place the lock retainer flange side down. Then, place the nylon spacer in the channel and insert the lock through the lock retainer and nylon spacer. Move the locking mechanism bar to the left and insert the retainer and lock into the lock housing with the flange side down. Open the chest and insert the I-hook in the lock housing through the top hole in the lock retainer. Then, fasten the i-hook with the self-tapping screw. Here’s a JOBOX lock tip: the most common lock used for JOBOX chests is a Master Lock #5. It comes in two types – standard and commercial. If you’re using the commercial Master Lock, we recommend removing the rubber bumper from the top of the lock. This will help prevent the lock from sticking inside the lock housing.