Good Quality A2-70 A4-70 ASTM F593 Stainless Steel Hex Bolts for Lyon Factory

Stainless Steel Hexagon Head Bolts Hex Cap Screws Standard: ASME B18.2.1, DIN931, DIN933   Various configurations are also available Inch Size: 1/4”-1.1/2” with various lengths Metric Szie: M6-M39 with various lengths Material Grade: ASTM F593 A, B, C, D, E, F, G, H; ISO 3506 A2-70, A2-80, A4-70, A4-80 Finish: Plain Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports Please feel free to contact us for more details.

  • Good Quality A2-70 A4-70 ASTM F593 Stainless Steel Hex Bolts for Lyon Factory Related Video:



    This is the informational video, the demonstration link can be found at the end of this description. click/copy.

    1)soak bolts in penetrating oil and let the car sit for at least 2hrs
    2) spray again
    3) using the 2 hammers, place the ball end on any metal surrounding the bolt ( bushing hosing, mount, control arm)
    4) hit the other end of the ball peen hammer with your other hammer using sharp motions to vibrate the rust loose
    5) spray, tap, spray.

    you will see dirty rust leaking out with the penetrating oil, this means the oil has seeped into the threads and is
    removing the rust from the threads.

    6) place impact on the first bolt, ideally work your way from the center of your car, towards the wheel (first bolt has the most torque,
    and you need the stability of the other end of the arm in order
    to break the first bolt loose.) I usually go from the inside, to the far outside, then go to the last bolt (strut bolt)

    **DONT REMOVE ANY BOLTS!!!!! JUST LOOSEN THEM WHEN THE THREADS COME OUT, LEAVE THE BOLTS IN UNTIL THEY ARE ALL LOOSE**
    7) In short busts: tighten pause loosen. Keep doing this until you see moment.
    8) at this point, do longer bursts on the impact. You want more loosen, less tighten. spray in between.

    IF THIS IS WORKING THEN SKIP HEAT, IF NO LUCK then hammer spray, impact heat.
    do this a few times until bolt starts moving. PATIENCE IS KEY.

    9)Thats it. It will backout. If you break the bolt using this method, the bolt was too far gone, and there was nothing
    more you could do, this has worked 100% for me so far.

    https://youtu.be/xwe6VqSw37A



    “Subscribe Now: https://goo.gl/1zKDlX

    About The Show –
    Tighten your bolts and buckle your seat belts for new adventures with Rob the Robot! Join Rob, the galaxy’s most curious and adventurous robot as he explores wondrous planets with his friends Ema – the alien linguist, TK – the wheeling toolkit, and Orbit – the quirky artist. Follow their adventures as they explore, solve problems and make amazing discoveries throughout the Robot Galaxy, in this 3D animated preschool series full of fun and laughter.

    Much Love,

    HooplaKidz TV”