https://www.etrailer.com/p-RR31200.html
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install the Foxwing awning from Rhino-Rack, part number RR31200. The first step in installing the Foxwing awning is to attach the brackets to the backside of the awning. To do this, you will need to pull the cover back on the one end and fit the four square headed bolts into the tracks, two on the top and two on the bottom. With the bolts in, we can put the feet on and just loosely fit them over the bolts. With the plastic feet in place, we are going to take our metal hardware bracket and just slip it in. We will do this for both feet. With them metal hardware bracket in place, we are going to go ahead and slip on our flat washers and our nylon locking nuts so we can hold everything together while we maneuver and start tightening things down. Again, we do not need to tighten anything down at this point. Just get everything threaded on there so we can keep all of the parts together. 0:55