ASME B18.3 Socket Set Screws
Imperial Thread Size: 0# - 2"
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
This video tutorial shows you how to make a threaded bar with a ball-joint end using a combination of revolve and extrude.
These long lasting Scotch-Brite 3M Radial Discs with flexible bristles allow you to polish difficult to reach, intricate and detailed areas. No compound is required. Great for use by jewellers, silversmiths, engineers and craftspeople for use on all metals, wood, ceramics and plastics. Useful for defuzzing and sanding in wood carving. https://www.eternaltools.com/3m-radial-bristle-polishing-discs
Stack 3 at a time on your Screw Mandrel. Do not mix the grits. (Can stack up to 6 on a mandrel)
Use at approximately 15,000RPM on your hand drill and exceed no more than 35,000 RPM
To use correctly, be sure when looking at the top of the mandrel, the bristles all turn to the right, (there is a 3M printed on the back of each disc, this should be facing towards the shaft of the mandrel)
For a pre-polish to polish, work your way through the grades, beginning with the coarsest to the finest (80, 120, 220, 400 and finally 600 grit being the finest)
Unlike natural bristle brushes there is no need to add compound, so no mess, and no chemicals!
Use for pre-polishing, deburring and texturing for jewellery work, defuzzing and sanding in wood carving in all the awkward areas of your work.
Cleaning, Deburring, Pre-polishing, Texturing, Defuzzing in Woodcarving
Removes Fire stain and discolouration
No compounds necessary
Long lasting Cubitron Mineral Blend
Dust free
Perfect for hard to reach and detailed areas of work
For use on all metals, wood, ceramic and plastics
Flexible Bristles
Use with light pressure