ASTM F912 F912M Alloy Steel Socket Set Screws Grub Screws
Metric Size: M1.4 – M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
KAPTI NUT® installation in four steps:
1. KAPTI NUT® fasteners are installed in a panel with a pre-pierced hole, by a single bow from a conventional press simple die tool underneath. The panel and the KAPTI NUT® are located onto the die pin. The taper on the pin centralises the panel hole and the KAPTI NUT®. This ensures the accuracy of positioning attributed to the KAPTI NUT®. The die pin is spring loaded and retracts into the die whilst maintaining the fastening position.
2. The KAPTI NUT® is pressed through the panel forming a tapered flange on the back. It is this formed flange which makes the panel rigid and contributes to the overall performance of the fastening.
3. When the KAPTI NUT® meets the internal form of the die tool, the leading edge is rolled back on itself to meet the flange. This creates a mechanical locking between the fastener and the panel. The unique square profile and radial splines interlock with the panel flange to provide a secure anti-rotational device. The top of the KAPTI NUT® is now flush with the panel. These three fundamental characteristics can be visually inspected eliminating any concerns around structural integrity.
4. The two parts are now locked providing a high strength threaded attachment point which can be used from either side.