Unboxing and Reviewing an Old All Time Favorite that gets a lot of bad rap because NON-HOBBYIST failed to realize that Redcat Racing is trying to give you a lot for a low budget price so they cut out QoS and overlook a few manufacturing flaws.
Actually, this 10th Scaler of a Monster Truck is a beast, with its 64T Spur and 21T Pinion Gear. It’s durable and powerful to keep you thrilled for hours out of a day.
Every aftermarket brand name seems to support it, so getting upgrades and replacement parts isn’t a problem at all. The truck is designed very simple enough, you’ll just have to keep track of all the screws and where they belong because you have a lot of course and fine pitched thread screws to unscrew and screw back on when you go to assemble this BULLY of a Monster Truck.
You do need to inspect your Volcano thoroughly if and when you purchase it because it might have a few manufactures flaws.
1) Mine came with a lot of screws loose (e.g. the 3mm flat head screws are to small for the holes they screw into) that’ll strip in the holes they’re used in. I suggest either using typical White Glue or Fingernail Polish on any of the screws that screw into plastic to hold them in place.
2) I had leaking Diff Case and I had to replenish the fluid that was lost.
3) Right Rear Adjustable Strut was Terribly Loose and I had to tighten up considerably.
4) I had to re-tape the ESC down because the cheap tape that was used pulled apart on the first run.
5) Right Front drive axle is bent so I know that in the near future I’ll be replacing all axles with CVD’s.
6) The Center Drive Shaft Out-Drive Grub Screw backed out and jammed against the motor and caused the Front Wheels not to turn. I thought the front diff broke.
Other than that this truck is a Beast on 2S and I would hate to see what it can do on 3S. It probably would be insane to drive.
If I was to rate this truck I would give it a 3.5 Stars out of 5 just because it is NOT truly RTR. I had to first do some maintenance on it and it still broke on its Maiden Run.
Chuyên sản xuất: ỐNG THÉP LUỒN DÂY ĐIỆN MỀM PVC/TY REN/TY TREO/TY RĂNG/THANH REN/ TY TREO mạ kẽm M6, M8, M10, M12, M16 – (High quality Galvanized Thread Rod) 1m, 2m, 3m, đạt tiêu chuẩn JIS B 1051 – JAPAN & DIN 975 & DIN 976- Đức, Đai treo /Cùm treo, Đai treo 2 mảnh (Pipe hanger/Conduit Clamp), tắc kê đạn, Đai treo Omega, cùm omega, Cùm Ubolt, Cùm Ubolt lá (U Bolts) Gía đỡ cơ điện (M&E/Mechanical Fixings, Fasteners and Spring steel Supports) Cùm treo ống / Kẹp treo ty & ống / Kẹp treo ống thép luồn dây điện, ống PCCC/ HVAC (Steel conduit hanger/Pipe hanger/Clevis Hanger), Kẹp xà gồ/ Kẹp dầm thép (Beam Clamp/Suspending Clamp/C-Clamp), Thanh chống đa năng (Unistrut Channel/ Strut/ C-Channel/ Double Unistrut profile ), Đai ốc lò xo cho thanh chống đa năng (Long spring nut), Tay đỡ đơn (Cantilever Arm), U cùm ( U bolts), Tắc kê đạn (Drop In Anchor), Đai treo (bát treo) cho hệ thống điện nhẹ M&E / HVAC/PCCC /Điều hoà không khí cho toà nhà cao tầng và nhà máy sản xuất công nghiệp tại Việt Nam.
Mọi thông tin chi tiết về sản phẩm của Cát Vạn Lợi, xin quý khách hàng vui lòng liên hệ: 1900 5555 49
CÔNG TY TNHH THIẾT BỊ ĐIỆN CÔNG NGHIỆP CÁT VẠN LỢI
VPGD : 61 Đường số 7, KDC CityLand Center Hills, P. 7, Q. Gò Vấp, TPHCM
Tel: 08-35886496/ 22 46 46 99
Fax: 08-35886505
E-mail: baogia@catvanloi.com
Website: WWW.CATVANLOI.COM –
https://ongluondaydienvietnam.wordpress.com/
Youtube: WWW.CATVANLOI.COM
Facebook: WWW.CATVANLOI.COM
Phòng chăm sóc khách hàng: 0943353039 (Mr.Tâm)