Watch as this $2.00 snowplow moves a fair amount of snow effortlessly
actual cost is $2.00
Plow is a little over 6 feet wide and 3 feet high.
Plow is mounted on the Rear of the Van.
Ingredients are as follows,
The “hitch”,
1 slightly used 1996 Dodge Caravan, 1 very old trailer axle, some old rope, some old clothesline, some old chain and a few bolts and washers.
The mounting “Bracket” assembly,
is made primarily from most of an old bench-press, a short 2″x 2″ (inside the framing),
an old t-bar from a sign and one $2.00 strap (to tie the t-bar to the bench-press).
The plow,
2 old tin roof sheets, some old planks, a 2″x 3″, a couple of 2″x 4″ a bunch old of screws and washers, half a dozen old threaded rods, some tin from the cut sheets, lots of that old clothesline, a smaller t-bar that the one on the mounting bracket, some haywire, a bit old “frost fence” wire.
The Winch,
One old car jack (from the same van), some old rope, a few old pieces of wood (various sizes), an old seat-belt, an old tie-down belt and 1 metal mechanic’s ramp.
It is not perfect, but it is much better than shoveling,
the Winch can be controlled from the driver’s seat, using a battery operated drill.
see the whole series here:
https://www.youtube.com/playlist?list=PLCTG4sIxL7eV7imZ3NFaSEN-4WAZLwxK9
This was my very first rear-mounted snowplow on a minivan, and I have learnt many things from it.
One of the things I had a problem with, was the plow being attached under the van, this makes it hard/impossible to mound snow high…
Fixed that problem with this Year’s plow system.
I have a Dodge Caravan 1998, that has some issues but still runs, and a vivid imagination.
I also have a pile of stuff in and around the barn and know how to use basic tools.
This Year I decided to use an old oil barrel as a snowplow.
So I cut it into thirds and connected two of the sections end to end, and then added structure, supports and found a way to connect it all to my minivan.
As I was finishing up my build, I came across an ad for a 3000 lbs. winch on sale for under $70… I ran to the store and picked one up, which I later mounted to one of the seat bases inside the van.
I have now been able to clear the yard after three different storms, and this is the latest video from a series I have put together.
here is the link to the playlist.
https://www.youtube.com/playlist…
By sharing this, I hope to show people that we often hold the solutions to our problems, but just need to look at things from a different viewpoint. In my case it was an oil drum that I saw as a snowplow, and a bunch of junk that I saw as frame work… I do not have a welder and that is why you will see a lot of ropes, belts, and nuts and bolts…
So go out there and re-engineer something that is no longer useful for the purpose it was designed for, get creative and you may just find some answers to some of your issues…
merci de votre visionnement,
prenez un petit moment afin de visiter https://www.youtube.com/user/danbythesea
Je vous invite a venir visitez mon site:
https://www.danbythesea.com/francais.html
thank you for watching,
take a moment to visit my YouTube page
https://www.youtube.com/user/danbythesea
I invite you to visit my site:
https://www.danbythesea.com/english.html
The Disc-Lock Washer harnesses Disc-Lock’s wedge-locking system to prevent nuts and bolts coming loose. Under vibration, a nut or bolt will attempt to rotate loose but the interlocking cams and non-slip ridges of the Disc-Lock Washer work together to create a jamming effect, preventing the nut or bolt from rotating and maintaining joint integrity.
For more information visit https://www.disc-lock.co.uk