Hey Guys check out Joshua Clement’s DIY and Home Improvement videos at https://www.youtube.com/channel/UCO8jhUZTY6vU3ogfRsaG6sg and follow him on Facebook at https://www.facebook.com/ClementDIY
Thanks!
Howdy, everyone! I’m Joshua and I’m going to talk to you about how to remove those toggle bolts from the walls. Toggle bolts are one of the best inventions because they allow you to put stuff anywhere you want on drywall, plaster or even your paneling. But when it comes getting them out – they’re impossible to get out. You can’t save the bolt on the backside and you end up losing it. So here we have a toggle bolt that is in the wall. As you can see you can’t get it out. A toggle bolt is designed to after goes into the wall expand grab as much surface area is possible that why you can hang a lot of wait on a very small area. To get it out you’re going to need a drill or a screwdriver with a phillips bit. What we’re going to do is we’re going to grab onto our screw. start pulling a little bit and slowly start removing that screw. What happens is the toggle bolt on the inside of the wall ends up falling down and ends up hitting the base plate on the inside of the wall. Or staying in your insulation. It’s not going to hurt anything there all that happens is your going to loose the back of your toggle bolt so you are going to have to buy a new one if you are wanting to put it someplace else.
Thanks for watching
In the RC World, having the right tool to do the job is priceless! Now add a tool that does two tasks?? That’s a great tool!
Here’s where I got them and some info from AKA:
AKA Double Play Nut Driver:
https://www.raceaka.com/DOUBLE-PLAY-NUT-DRIVER-55MM-70MM_p_1143.html
The Double Play nut driver creatively lightens your toolbox by putting a 7mm and 5.5mm wrench in one! The 7mm driver fits metric wheel nuts found on most popular 1:10 buggies and short course trucks, while the 5mm driver is common for shock nuts and most nuts on metric 1:8 cars. The machined aluminum handle and sleeve provides weight reduction over standard steel tools with the added durability of a hard anodized finish.
-
2 in1 5.5mm and 7mm nut driver
AKA 17mm Wheel Wrench:
https://www.raceaka.com/17MM-WHEEL-NUT-WRENCH_p_1128.html
The AKA 17mm 1:8 Wheel Wrench is made from brilliantly machined and anodized aluminum for a durable and esthetically pleasing look. The business end of the wrench has been optimized to fit all open and enclosed face wheel nuts. The oversized handle features laser etched AKA logos and fits nicely into the palm of your hand, offering plenty of leverage to get those over-tightened nuts off in a breeze. The AKA 17mm wrench will surely become a staple in your tool box for years to come.
-
Fits all 17mm wheel nuts
-
Durable anodized finish
-
Laser etched engraving