Metric Size Socket Set Screws
Thread Size: M1.4-M52
DIN913, DIN914, DIN915, DIN916
ISO4026, ISO4027, ISO4028, ISO4029
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
Easily take off stuck, stripped, or rusty skateboard truck hardware.
Go to https://ratvision.com/ for more info.
For great prices on Longboard and Skateboard equipment we recommend
https://stokedskateboards.com/
Sometimes the mounting hardware bolts can strip or become stuck on a skateboard. Some people try to saw them off, but there is an easier way to remove stuck skate hardware quickly without causing any damage to the deck.
There are 2 different sizes for commonly used cross head or Phillips head screw drivers. Skate hardware requires a size number 2 screw driver or size 2 phillips head bit.
All you need is a screw/drill gun, a 5/32 drill bit, and a 3/16 drill bit.
Step 1:
Clamp or hold the nut on the end of the bolt. Drill into the head of the bolt about 1/8th of an inch using the 5/32 drill bit.
Step 2:
Using the 3/16 bit, drill into the hole you made using the 5/32 bit until the head of the bolt comes off.
If the head of the bolt is becomes stuck on the drill bit holt it with a pliers and twist the head off of the drill bit.
This method works for all skateboard hardware including street skateboards, downhill and longboard skateboards.
If you have any questions about this video or anything skate related send us a message through our channel. You can also find a lot more skateboard info at RatVision.com
https://www.aldi.co.uk/c/specialbuys/diy