MOOG experts discuss why a castle nut is the preferred fastener for MOOG® tie rod ends, ball joints, idler arms and Pitman arms, how it makes installation easier, and how it prevents accidental damage during installation.
Korky Toilet Tank to Bowl Hardware Kit Install by Korky | https://www.korky.com/accessories-kits/toilet-tank-bowl-hardware-kit
Hello and Welcome to Korky toilet repair.
Today we are going to install your new Korky tank to bowl hardware.
First shut off your water supply line .
Flush and hold the lever down to drain the water from your tank.
Sponge out the remaining water in your toilet tank.
Place a bucket underneath your toilet tank to catch any excess water.
Disconnect your water supply line.
Locate and remove all old nuts, bolts, and washers from the toilet tank.
Use the new bolts, rubber washers, washers, and hex nuts, included in the packaging to secure the tank to the bowl.
Apply downward pressure to keep the tank level as you tighten the nuts in an alternating fashion until the tank is stable.
Do not over tighten the nuts; doing so may cause the porcelain to crack.
Reattach the water supply line.
Turn the water supply on to complete your installation.
Congratulations, you have successfully installed your new Korky tank to bowl hardware.
Thank you for choosing Korky.
If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553.