For more information visit https://www.bradburygroup.com/bradbury-stile-rollforming-lines.cfm
This video features the Bradbury Grage Door Stile rollfoming line. End stiles, double end stiles, and center stiles are used in sectional garage door panels to support roller brackets, hinge assemblies, and lock sets. Additional stiles are placed in door sections for wind load requirements. Stiles are typically manufactured from 20-gauge to 18-gauge galvanized or pre-painted steel. Bradbury roll former lines can be customized to punch and notch them per your design requirements. Stiles can be attached to door sections with mechanical fasteners or clinch joining technology. We will provide adhesive applicators, if required, for your application.
This equipment was videoed at The Bradbury Group headquarters in Kansas during customer buyoff prior to shipment. Due to certain restrictions, such as lack of loop pit and anchoring, equipment may not be operating at engineered capacity.
With a less cold shop, we tackled this small task. Don’t laugh — it’s only a humble nut! Needed a particular size to suit an old UK thread (3/8″ x 20 TPI BSF). The process, for something so simple, is a bit tedious due to the several stages. The ‘quick fix’ is to find a nut close enough in size, and drill it out and tap it! Here we did the slow way, working from solid with a piece of 3/4″ hex, which happened to be pretty hard material. Oh for CNC!