Introducing the new WARN® ZEON® winch. A design masterpiece that’s tough and fearless enough to tackle anything you will. Features a durable satin-black cast-aluminum housing, muck-busting sealing, and a convertible control pack that lets you mount the winch the way you want.
WARN ZEON 8-S: https://partsengine.ca/p-206-warn-zeon8-zeon8-s-winch.aspx
WARN ZEON 10-S: https://partsengine.ca/p-205-warn-zeon10-zeon10-s-winch.aspx
WARN ZEON 12-S: https://partsengine.ca/p-203-warn-zeon12-winch.aspx
___
Transcript:
In this video, we will show you how to install the WARN ZEON 8-S Winch onto a Jeep Wrangler JK. This vehicle is equipped with a WARN Rock Crawler Stubby Bumper. But no matter the vehicle, the basic installation should be very similar. Before starting the installation, remember to read the instructions included with the kit, as included, the important safety information.
First, make sure your winch mount is installed onto your bumper. Next we’ll bolt up the fairlead to the winch mount. Now, insert the four applied flange hex nuts into the slots under the sides the winch drum. Lift the winch onto the mounting plate, being sure the flange hex nuts stay in place. Bolt the winch to the bumper going from the bottom up, through the fasteners on the winch. Run the wires from the winch through the grill up to the battery. Positive to positive, negative to negative.
Be sure the wires are clear of any sharp areas, moving parts or areas that may get hot. It should be noted that the ZEON’s unique convertible control pack can remain attached to the winch for an integrated look, or can be removed and remotely mounted if you choose. ZEON Winches with wire rope will come with the rope wound on the drum from the factory. If you have a ZEON Winch with the Warren Spydura Synthetic Rope, you’ll need to attach to the drum. First things first, install the chafe guard onto the rope.
Next, attach the included zip tie to the looped end of the rope, making sure not to tighten the zip tie down too much. Feed the rope through the fairlead and under the drum, then run the zip tie through the opening in the back side of the winch drum. Once through, you can go ahead in cut the zip tie. Next, insert the puck through the loop with the load facing in, toward the center of the drum.
Be sure to put some tension on the rope, to set the puck into place. Now you can spool the rope onto the drum. Finally, attach the hook to the winch rope and you’re done.
Remember that you’ll need to stretch the rope using the instructions,in the user manual before pulling with the winch. Also, be sure to download the WARN “Basic Guide to Winching Techniques”. This is a great resource to learn how to best use and rig your winch.
For more information about the ZEON winch and the entire lineup of WARN products, visit our website at warn.com
___
See a list of all discounted WARN products here: http https://partsengine.ca/m-88-warn.aspx
Not sure which winch to pick for your vehicle? Read more at our blog on how to choose the right one! How To Choose The Right Winch (https://blog.partsengine.ca/?p=3112)
Visit PartsEngine.ca for all Truck, SUV, and Jeep parts and accessories.
https://www.partsengine.ca
Shear Stud Connectors: https://www.shearstudconnectors.com
Stud Welding Machine
Stud Welder-Stud Çivisi https://www.studcivisi.net
Stud Kaynak Makinası
Steel Decking https://www.betonaltitrapezsac.com
Please contact us : +90 216 3402538-39
Email:groupenerji@gmail.com