ASME B18.3 Socket Set Screws
Imperial Thread Size: 0# - 2"
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
At least that’s the decision we made after we broke the torque wrench hammering these guys down. It was a bit of a project all told but we got ‘er done and were glad we did because we ended up discovering and righting some hardware wrongs once we’d dug into the project. Note to viewers: Check your keel bolts every 3-5 years. Thanks to the boys at https://www.perdidosailor.com/ for coaching us DIY’ers along. Enjoy!
Capacity:
• Max. thickness:
Stainless steel: 1.6 mm
Mild steel: 3.2 mm
• Max. hole diameter: 4 inch
• 4 inch diameter hole on 3.2 mm thickness mild steel
Specifications:
• Max. Pressure: 700 bar
• Oil Required: 47 cc
• Max. Output: 10 ton
• Ram Stroke: 25mm
• Dimension: 125 (H)mm
• Weight: 1.9 kgs
Benefits:
• Hydrualic punching tools are made from high quality materials
• Characterised by perfect and problem-free punching of metal
sheet to thickness of 3.2 mm(mild steel) and 1.6 mm(stainless steel)
• HP-180N is designed for PDV-10 (Punch driver) or any other tool
heads that require less than 180 cc of oil volume. HP-180N is not
equipped with a relief valve.
Do not use HP-180N with any compression head that requires
a relief valve.
Packing:
• Kudos plastic case
• Accessories:
PDV-10 (Punch driver)
HP-180N (Hydraulic hand pump)
6 sets Punch & dies (1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″)
3 pcs Draw stud adaptors (S, M, L)
2 pcs Draw studs (3/8″, 3/4″)