websites:https://www.minjiesteel.com/
We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.
Email: info@minjiesteel.com websites:https://www.minjiesteel.com/
We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.
Email: info@minjiesteel.com
Fairly simple if you can get about this way. Sometimes you can use some WD-40 or lubricant to help with the process if this does not work we will need to drill out the center with a reversed thread drill bit and use some form of a EZ out to pull it out. Unfortunately the crank is bent on this motor… but thought I could get you guys a video on how to do this if you need to.