Alloy Steel 33H 45H Set Screws Grub Screws
Metric Size: M1.4 – M52, Inch Size: 0# - 2"
Hexagon Socket(Allen), Torx Star, Square, Slotted Drive Types
Flat Point, Cup Point, Cone Point, Dog Point
Other Drive and Point Type are also available acc. to customer requirement
Various Surface Finishes
Various Material Grades are available
Please feel free to contact us for more details
GameChanger– the new GRS-16 Guide Rail Square: 5-seconds to accurate!
This accessory is designed to make square cuts with Track Saws much faster and more reliably accurate than any other track square. – Guaranteed!
Until now, all the accessories for squaring up a track saw guide rail relied in some way on the loose-tolerance T-slot found on just about every track or guide rail.
To overcome the inherent inaccuracy of clamping to this T-slot you needed to use a separate reference square to align the track square before each use.
This meant you were dealing with as many as FIVE loose items to assemble and align before you can make an accurate cross-cut: 1 Squaring accessory; 1 „T“bar for inserting into T-slot; 2 hex head bolts ¼-20; 2 Knobs or wingnuts and 1 Precision reference square
5 items total !
GameChanger: GRS-16 Guide Rail Square
Completely self-contained and self-aligning
5-seconds to accurate:
* Slide it on the guide rail
* Lock the Draw Latch – DONE
Accurate cross cuts with a track saw: now a snap
The smooth, flat bottom means no-mar handling on workpieces. Ergonomic handle for lifting to reposition track clear of non-slip track pads.
* 5-second set-up entirely from above
* Unbeatable accuracy
* Very strong alignment connection
* No reference square required
* No re-checking needed in use
* Zero-clearance between Square and track edge visually confirms accuracy
* No loose parts
Technical
Dim. approx. 16 x 6 x 2 inches; Wt. approx. 2 lbs.
Precision CNC machined one-piece 6061-T6 Aluminum, anodized.
Over Center Draw Latch: 304 S.S. with compensating spring. Attached with SS 8-32 x .375” Screws 9/64” Allen.
Track edge supported by the Square to prevent deformation by Latch.
No reliance on Track T-slot for alignment accuracy.
Compatible with FESTOOL, Makita and TRITON tracks **.
** Not for BOSCH or DeWalt
I Rail fastening and clamping products;
1. Clips and clamps: E series include:E1609,E1809,E1817,E2007,E2009,E2055 and W series include SKL1,SKL3,SKL12,SKL14,SKL75 and other clamps;
2. Square head screw spikes and hook spikes: Diameter 5/8,3/4,7/8,15/16,1¡±, length from 4¡± to 12¡±series spikes and Ss series include Ss5,Ss8,Ss23,Ss25,Ss36 spikes;
3. Clip Bolt and Track bolt: Clip bolts of the HS26, HS32 series, switch bolts, square head bolts, Insert Bolts and AREMA Track Bolt;
4. Insulators: Nylon insulators used for E Clips and Guide plates for SKL clips;
5. Dowels: Plastic and nylon dowels used for all kinds of screw spikes;
6. Shoulders: Assembly with all kinds of e Clips.
7. Insulating pad: Plastic, rubber and EVA pad Used for E clips and SKL clips;
8. Steel pad: Cast iron and forging steel pad used for E clips and SKL clips.
II Rail Jointing products:
1. Fish plate: America used 115RE, 132RE fish plates; Europe, Africa and Asia used UIC54, UIC60 fish plates, South America used TJ45, TJ57 fish plates and the UK used BS60, BS75 fish plates;
2. Fish bolts: Bolts used for the fish plates listed above;
3. Gauge rod: AREMA 1-1/4¡± and UIC, BS rail used gauge rods.
III High strength bolts and other non-standard fasteners:
1. Hex bolts£»with the diameter over M24 DIN,ASTM, BS Hex bolts, grade 4.6,4.8,5.6,5.8,6.8,8.8,10.9,12.9;
2. All kinds of nuts, standard parts, washers, Construction Industry bolts and precision parts.