14 Years Manufacturer Brass Tip Socket Set Screws Supply to Uruguay

Brass Tip Socket Set Screws

Metric Size: M1.4-M52, Inch Size: 0# - 2"

Various Drive and Point Types

Various Surface Finishes

Other Material Grades are available

Please feel free to contact us for more details

    • 14 Years Manufacturer Brass Tip Socket Set Screws Supply to Uruguay Related Video:



    Watch more Home Repair & DIY videos: https://www.howcast.com/videos/155535-How-to-Unstick-Rusted-Nuts-and-Bolts

    Never be frustrated by a rusted nut and bolt again with this foolproof removal method.

    Step 1: Brush off
    Loosen as much rust as possible off the nut with a wire brush.

    Step 2: Tap
    Tap the sides of the nut with a hammer to help the rust separate and fall off.

    Step 3: Apply heat
    Apply heat to the side of the nut for about a minute.

    Tip
    A small, narrowly directed propane torch—one made especially for small jobs—will work best for this job, but be careful.

    Step 4: Spray lubricant
    When the bolt is cool enough to touch, spray WD-40 on and around the nut and bolt.

    Step 5: Tap
    Tap the end of the bolt with a hammer to loosen the threads and allow the oil to penetrate.

    Step 6: Loosen
    Wait another minute or so for the oil to work, and then use your wrench to loosen.

    Tip
    It sometimes helps to tighten the nut slightly and then try loosening it again.

    Step 7: Split it
    If all else fails, buy a nut splitter and crack that sucker in half. Always wear safety goggles when using a splitter.

    Did You Know?
    Painting an object prevents rust from forming by blocking water and air from reaching the iron or steel surface.



    How To Video (Remove Frozen Axle Nut) ( 2001 Honda Accord) Youtube
    Subscribe to my channel with the link below

    https://www.youtube.com/user/jakesmobileauto?sub_confirmation=1

    Link toe this video https://youtu.be/8x9HKFpKLJk

    In this video I have resorted to using Acetylene & Oxygen after breaking to breaker bars and 1 socket. You only want to use this method as a last resort because more damage can occur to yourself, bearings or if you heat the axle nut wrong it many never come off. If you keep your heat moving slow and steady heating the axle nut, in about 1 minute it will be ready for removal. Alwasys use extreme caution when using this method and remember only do this if all other methods have failed.

    We put new video’s up ever week so subscribe, share this video, and give us a thumbs up.

    Thanks for Watching.

    For more video”s by Trump Candy check out these links below.
    Video’s With More DIY Automotive Tips & Tricks
    What You Don’t Know About Tie Rod Ends on a 2002 Chev Impala