How to make an endless loop bow string jig for around $40 to $60.
https://www.seansoutdooradventures.com
Parts list – see below for a list of things you will need.
1 = 10 foot unistrut
One diamond circular saw blade to cut unistrut
(Cut 2, 1 foot sections off of unistrut for string jig arms, and cut two 4 inch pieces of unistrut for the angle iron used in string stretching.)
4 – 6 inch long 1/2 inch bolts
4 – 1/4 inch bolts about an inch and a half long with allen wrench head and smooth top section
(Have the 1/2 inch bolts tapped and then screw the 1/4 inch bolts down in the top leaving the smooth part exposed for wrapping string)
8 – 1/2 inch nuts for securing ½ inch bolts to unistrut (one on top and one under unistrut)
4 – 2 1/2 inch long 3/8 inch bolts (2 of these will be used for securing the string jig arms to sliding bolt inside unistrut, and 2 for securing each string stretching jig.)
4 – 3/8 inch nut with spring backing that fits into the unistrut
2 pieces of angle iron—you will use these with garment hook for string stretching.
2 garment hook bolts with nuts (these will go through the angle iron for string stretching)
4 – 1 inch long 3/8 inch bolts and nuts for attaching angle iron to unistrut
2 – 2 inch long 3/8 inch bolts, nuts, and washers for bolting unistrut to table
2 – small bolts about an inch long with 4 nuts and 2 washers – for the side of one jig arm for attaching loose string ends to (Diameter of bolt not important, whatever you have will work.)
If you don’t have them already, 1/2 inch diameter and 3/8 inch diameter drill bits for drilling holes, and also a drill bit that will fit the size of bolt you use for attaching loose string ends.
https://www.siculocks.eu/en
SicuPlus by Farad wheel locks are known for highest quality standards. More than 25 car manufacturers world wide trust in our 35 years of experience.
With a production of over 87.000 qm and about 150 employees the family owned business is delivering the automotive industry world wide under the names SICUPLUS, STYLE FORM, SECURITY BOLT and EVO.
The whole production, from the engineering to the delivery of the wheel locks is under one roof. Due to this fact we assure the highest quality standard in each production stage. Furthermore we are extremely flexible and are able to meet or exceed every customer requirement.
SicuPlus (Farad) is delivering the automotive industry in OE quality with wheel locks, roof boxes as well as wheel covers and wind deflectors.