Nylon Tip Socket Set Screws
Metric Size: M1.4-M52, Inch Size: 0# - 2"
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
Chris Sacca and Mark Cuban fight with each other during the brightwheel pitch.
Watch this scene from Shark Tank 7×26.
Subscribe: https://goo.gl/mo7HqT
(Always Remember: To prevent serious eye injury always wear safe eye protection when performing vehicle maintenance or service and follow recommended safety procedures.)
To adjust a wheel bearing on a trailer axle, first torque the inner adjusting nut to 200 ft. lbs. to seat the bearing rollers and the wheel seal. Always rotate the hub while torqueing the nut. Torque the adjusting nut to 200 ft. lbs. while rotating the hub. Then back the nut off one turn. Now, torque the nut to 50 ft. lbs. then back it off 1/4 turn. Install the retaining hardware and torque the jam nut to the proper specifications. For nuts less than 2 5/8″ 200-300 ft. lbs. and nuts greater than 2 5/8″ 300-400 ft. lbs, install the dial indicator and check in play. In play should be within 1 — 5000ths of an inch. If the in play is not within specs re-adjust the inner nut to obtain the correct in play.