ASTM A563 DH Heavy Hex Nuts
Dimension Standard: ASME B18.2.2
Inch Size: 1/4”-4”
Other Available Material Grade:
ASTM A563 A, B, C, D, DH and so on.
Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
The ASTM A563 specification covers the chemical and mechanical requirements for carbon and alloy steel nuts used on bolts, studs, and externally threaded fasteners. The charts below address over tapping allowances for hot-dip galvanized nuts, grade marking requirements, and mechanical requirements.
According to the A563 specification, “The requirements for any grade of nut may, at the supplier’s option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein unless such a substitution is barred in the inquiry and purchase order”. This is important because some nut grades are not readily available in certain sizes and finishes. Additionally, the specification allows for the substitution of ASTM A194 grade 2H nuts in lieu of A563 grade DH nuts due to the lack of availability of grade DH nuts in nominal sizes 3/4″ and larger.
Hot-dip galvanized nuts must be tapped oversize to allow for the added thickness of the zinc on the threads of the externally threaded fastener. These allowances are addressed in the chart below.
Various nut styles exist and to some degree are determined by their grade. These styles include hex, heavy hex, square, jam, coupling, and sleeve.
| A | Carbon steel, hex or heavy hex |
|---|---|
| B | Carbon steel, hex or heavy hex |
| C | Carbon steel, quenched and tempered, heavy hex |
| D | Carbon steel, quenched and tempered, heavy hex |
| DH | Carbon steel, quenched and tempered, heavy hex |
| C3 | Weathering steel, quenched and tempered, heavy hex |
| DH3 | Weathering steel, quenched and tempered, heavy hex |
| Grade | Style | Size, in. | Proof Load, ksi | Hardness, HBN | |
|---|---|---|---|---|---|
| Plain | Galvanized | ||||
| A | Hex | 1/4 - 1-1/2 | 90 | 68 | 116 - 302 |
| Heavy Hex | 1/4 - 4 | 100 | 75 | 116 - 302 | |
| B | Heavy Hex | 1/4 - 1 | 133 | 100 | 121 - 302 |
| Heavy Hex | 1-1/8 - 1-1/2 | 116 | 87 | 121 - 302 | |
| C / C3 | Heavy Hex | 1/4 - 4 | 144 | 144 | 143 - 352 |
| D | Heavy Hex | 1/4 - 4 | 150 | 150 | 248 - 352 |
| DH / DH3 | Heavy Hex | 1/4 - 4 | 175 | 150 | 248 - 352 |
| For UNC, 8UN, 6UN, and Coarse Pitch Threads | |||||
| Element | Grades O, A, B, C | D** | DH** |
|---|---|---|---|
| Carbon | 0.55% max | 0.55% max | 0.20 - 0.55% |
| Manganese, min | 0.30% | 0.60% | |
| Phosphorus, max | 0.12% | 0.04% | 0.04% |
| Sulfur, max | 0.15%* | 0.05% | 0.05% |
| * For grades O, A and B a sulfur content of 0.23% max is acceptable with the purchasers approval | |||
| ** For grades D and DH a sulfur content of 0.05 - 0.15% is acceptable provided the manganese is 1.35% min | |||
| Element | Classes for Grade C3* | DH3 | ||||||
|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | N | ||
| Carbon | 0.33 - 0.40% | 0.38 - 0.48% | 0.15 - 0.25% | 0.15 - 0.25% | 0.20 - 0.25% | 0.20 - 0.25% | 0.20 - 0.53% | |
| Manganese | 0.90 - 1.20% | 0.70 - 0.90% | 0.80 - 1.35% | 0.40 - 1.20% | 0.60 - 1.00% | 0.90 - 1.20% | 0.40% min | |
| Phosphorus | 0.040% max | 0.06 - 0.12% | 0.035% max | 0.040% max | 0.040% max | 0.040% max | 0.07 - 0.15% | 0.046% max |
| Sulfur, max | 0.050% | 0.050% | 0.040% | 0.050% | 0.040% | 0.040% | 0.050% | 0.050% |
| Silicon | 0.15 - 0.35% | 0.30 - 0.50% | 0.15 - 0.35% | 0.25 - 0.50% | 0.15 - 0.35% | 0.15 - 0.35% | 0.20 - 0.90% | |
| Copper | 0.25 - 0.45% | 0.20 - 0.40% | 0.20 - 0.50% | 0.30 - 0.50% | 0.30 - 0.60% | 0.20 - 0.40% | 0.25 - 0.55% | 0.20% min |
| Nickel | 0.25 - 0.45% | 0.50 - 0.80% | 0.25 - 0.50% | 0.50 - 0.80% | 0.30 - 0.60% | 0.20 - 0.40% | 1.00% max | 0.20% min** |
| Chromium | 0.45 - 0.65% | 0.50 - 0.75% | 0.30 - 0.50% | 0.50 - 1.00% | 0.60 - 0.90% | 0.45 - 0.65% | 0.30 - 1.25% | 0.45% min |
| Vanadium | 0.020% min | |||||||
| Molybdenum | 0.06% max | 0.10% max | 0.15% min** | |||||
| Titanium | 0.05% max | |||||||
| * Selection of a class shall be at the option of the manufacturer | ||||||||
| ** Nickel or Molybdenum may be used. | ||||||||
| Grade Identification Marking | Specification | Material | Nominal Size, In. | Proof Load Stress, ksi | Hardness Rockwell | See Note | |
|---|---|---|---|---|---|---|---|
| Min | Max | ||||||
| ASTM A563 Grade O | Carbon Steel | 1/4 - 1-1/2 | 69 | B55 | C32 | 2,3 | |
| ASTM A563 Grade A | Carbon Steel | 1/4 - 1-1/2 | 90 | B68 | C32 | 2,3 | |
| ASTM A563 Grade B | Carbon Steel | 1/4 - 1 | 120 | B69 | C32 | 2,3 | |
| >1 - 1-1/2 | 105 | ||||||
| ASTM A563 Grade C | Carbon Steel, may be Quenched and Tempered | 1/4 - 4 | 144 | B78 | C38 | 4 | |
| ASTM A563 Grade C3 | Atmospheric Corrosion Resistant Steel, may be Quenched and Tempered | 1/4 - 4 | 144 | B78 | 38 | 4,6 | |
| ASTM A563 Grade D | Carbon Steel, may be Quenched and Tempered | 1/4 - 4 | 150 | B84 | C38 | 5 | |
| ASTM A563 Grade DH | Carbon Steel, Quenched and Tempered | 1/4 - 4 | 175 | C24 | C38 | 5 | |
| ASTM A563 Grade DH3 | Atmospheric Corrosion Resistant Steel, Quenched and Tempered | 1/4 - 4 | 175 | C24 | C38 | 4,6 | |
|
NOTES: 1.In addition to the indicated grade marking, all grades, except A563 grades O, A, and B, must be marked for manufacturer identification. 2.Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A, or B. 3.Properties shown are those of nonplated or noncoated coarse thread nuts. 4.Properties shown are those of coarse thread heavy hex nuts. 5.Properties shown are those of coarse thread heavy hex nuts. Other nuts styles and fine threads may apply. 6.The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel. Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. n-80-n-81. |
|||||||
For Nuts: Hot Dipped Galvanized per Specification F2329
| Nominal Nut Size, in. and Pitch | Diametral Allowance, in. | Pitch Diameter | |
|---|---|---|---|
| Min | Max | ||
| 0.250 - 20 | 0.016 | 0.2335 | 0.2384 |
| 0.312 - 18 | 0.017 | 0.2934 | 0.2987 |
| 0.375 - 16 | 0.017 | 0.3514 | 0.3571 |
| 0.437 - 14 | 0.018 | 0.4091 | 0.4152 |
| 0.500 - 13 | 0.018 | 0.4680 | 0.4745 |
| 0.562 - 12 | 0.020 | 0.5284 | 0.5352 |
| 0.625 - 11 | 0.020 | 0.5860 | 0.5932 |
| 0.750 - 10 | 0.020 | 0.7050 | 0.7127 |
| 0.875 - 9 | 0.022 | 0.8248 | 0.8330 |
| 1.000 - 8 | 0.024 | 0.9428 | 0.9516 |
| 1.125 - 8 | 0.024 | 1.0678 | 1.0768 |
| 1.125 - 7 | 0.024 | 1.0562 | 1.0656 |
| 1.250 - 8 | 0.024 | 1.1928 | 1.2020 |
| 1.250 - 7 | 0.024 | 1.1812 | 1.1908 |
| 1.375 - 8 | 0.027 | 1.3208 | 1.3301 |
| 1.375 - 6 | 0.027 | 1.2937 | 1.3041 |
| 1.500 - 8 | 0.027 | 1.4458 | 1.4553 |
| 1.500 - 6 | 0.027 | 1.4187 | 1.4292 |
| 1.750 - 5 | 0.050 | 1.6701 | 1.6817 |
| 2.000 - 4.5 | 0.050 | 1.9057 | 1.9181 |
| 2.250 - 4.5 | 0.050 | 2.1557 | 2.1683 |
| 2.500 - 4 | 0.050 | 2.3876 | 2.4011 |
| 2.750 - 4 | 0.050 | 2.6376 | 2.6513 |
| 3.000 - 4 | 0.050 | 2.8876 | 2.9015 |
| 3.250 - 4 | 0.050 | 3.1376 | 3.1517 |
| 3.500 - 4 | 0.050 | 3.3876 | 3.4019 |
| 3.750 - 4 | 0.050 | 3.6376 | 3.6521 |
| 4.000 - 4 | 0.050 | 3.8876 | 3.9023 |
| Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. B-173. | |||
CÔNG TY TNHH THIẾT BỊ ĐIỆN CÔNG NGHIỆP CÁT VẠN LỢI
Văn Phòng: 504 Lê Quang Định, P.1, Quận Gò Vấp, TP Hồ Chí Minh
Điện thoại: (84.8) 3588 6496/ 3895 6808/ 2246 4699
Fax: (84.8) 3588 6505
Nhà Máy: 50 Tây Lân, P.Bình Trị Đông A, Q.Bình Tân ,TP.HCM
Website: www.catvanloi.com E-mail: sales@catvanloi.com
Phòng KD & Dự án: Ms Hiền 0902377537 / 08-22464699
Ống luồn dây điện tiêu chuẩn Anh BS4568 Class 3-BS4568 Class 3 White steel conduit; Ống thép trắng kẽm luồn dây điện tiêu chuẩn Nhật Loại JIS C8305 Type E- JIS C 8305 Type E–White steel conduit; Phụ kiện ống luồn dây điện EMT / IMC/ BS4568/ JIS C8305- GI steel Conduit Accessories/ Steel conduit Fittings; Hộp thép âm tường đấu dây điện/ Electrical Steel box- Concrete box- Switch steel box — Electrical Junction box; Hộp nối ống luồn dây/ Conduit Outlet box- Rigid conduit body- Besa box; Ống thép luồn dây điện mềm có bọc nhựa KAIPHONE/CVL-Water-proof Flexible Metallic Conduit (W.P FMC); Ống thép luồn dây điện mềm không bọc nhựa- Flexible Metallic Conduit (FMC); Ống thép luồn dây điện mềm có bọc nhựa dày- Liquidtight Flexible Metal Conduit (LFMC); Phụ kiện nối ống thép luồn dây điện mềm -Flexible Conduit Connectors; Gía đỡ cơ điện M&E / Kẹp treo ống thép/ Kẹp xà gồ -Mechanical Fixings, Fasteners and Supports- Beam Clamp- Pipe clip- Pipe Clamp / Máng lưới cho datacenter- Wire mesh tray/ Steel cable Basket; Thanh chống đa năng Unistrut/ Strut 41 x 41 x 3000- 41 x 21 x 3000; Ty ren/Thanh ren- Thread rod ; Ty ren /Ty treo/ Thanh ren/Ty răng M6, M8, M10, M12, M16, M20- TCVN 197:2002/JIS B 1051 /DIN 975/DIN 976 (High quality Thread rod), Khớp nối ty ren (Thread rod coupling), Bịt đầu ty (Plastic end cap for thread rod), Tắc kê đạn (Drop in Anchor), Tắc kê tường (Anchor Bolts), Tắc kê chuồn (Heavy duty concrete Insert), Cùm treo ống/Pad treo ống/ Đai treo ống 2 mảnh / Kẹp treo ty & ống / Kẹp treo ống thép luồn dây điện, ống PCCC/ HVAC (Steel conduit hanger/Steel conduit Clamp/Pipe hanger), Kẹp xà gồ/ Kẹp dầm thép (Beam Clamp/Iron Beam Clamp), Kẹp treo C (Purlin Clamp/Suspending Clamp), Kẹp treo ống HVAC (Clevis hanger),. IMC and RMC elbows are threaded on each end. Elbows of the correct type and dimensions are an important element of the raceway installation. Factory-made elbows in both standard and special radius are readily available for all sizes of steel
RMC, IMC, and EMT. Elbows with integral couplings are available in trade sizes 2-1/2 through 4. Specialized large radius elbows, often referred to as “sweeps,” are also available. They are custom ordered to solve various installation problems.Some typical uses of sweeps are to facilitate easier wire pulling, install conduit in limited or
geometrically difficult space, provide specific stubup length, or enhance protection of communication or fiber optic cables during pulls. Physical dimensions of factory-made elbows for RMC, IMC, and EMT vary between manufacturers. When installing factory elbows for a job, being aware of this variability can avoid installation problems. Always measure to be safe.