See how the AutoLock™ screw driver and self drilling tek screws can be used to create strong joints. AutoLock™ screw driving tools lock onto a screw to prevent dropping and bucking screws when installing. Say goodbye to dropping screws and get more work done.
* Operation is simple: Hold a screw near the tip and push it into the driver. The AutoLock™ driver triggers forward to lock in the screw. Drive the screw all the way in. The head is automatically released about 1/2″ before full install and then the driver is ready for another screw.
* With an AutoLock™ driver securely holding your screw there is no need to hold screws on the driver with a second hand. This extreme hold is especially useful when driving self drilling tek screws.
* AutoLock™ drivers have a purely mechanical hold so there are no magnets to attract drill shavings and debris.
* Need to pull out screws? Forget wiggling them out by hand or using a pliers. Keep your drill spinning and pull them right out. Pull the outer sleeve back to eject the screw.
See more at www.newrevolutiontools.com