Product Page: https://mishimo.to/1MboPof
Engineering Blog: https://engineering.mishimoto.com/?cat…
Facebook: https://www.facebook.com/GoMishimoto
Twitter: https://www.Twitter.com/Mishimoto
Instagram: https://www.Instagram.com/Mishimoto
• Direct fit for the 2015+ Subaru WRX
• Dyno-proven gains of up to 73 whp and 64 wtq with catted downpipe, Mishimoto tune and Mishimoto Performance Air Intake using 93 octane fuel (see additional images for dyno chart)
• Dyno proven gains of up to 57 whp and 52 wtq with catted downpipe and Mishimoto tune using 93 octane fuel (see additional images for dyno chart)
• Significant torque improvement in the low end and across the entire power band
• Fits with both manual and CVT transmissions
• Extremely aggressive turbo and exhaust tone under acceleration and boost
• 304 Stainless Steel 1-piece design allows for uninterrupted exhaust flow
• 3/8″ thick stainless steel CNC-machined 4-bolt flange
• 3.5″ to 3.0″ transition out of turbo outlet allows exhaust gas to flow smoothly
• Additional wideband O2 sensor bung and plug in ideal location for aftermarket wideband sensors
• Mates with the stock cat-back exhaust
• New turbine housing studs
• High flow catalytic converter (optional)
• Includes stock Subaru turbo outlet gasket
• Made in the USA
• Mishimoto Lifetime Warranty
Model: MMDP-WRX-15
2015 Subaru WRX/STI Down Pipe Installation Guide
PARTS LIST
(1) STAINLESS STEEL DOWNPIPE WITH 4-BOLT TURBO FLANGE AND 2-BOLT CAT FLANGE
(1) STAINLESS STEEL TRANSMISSION BRACKET (MANUAL OR CVT)
(1) HIGH-FLOW CATALYTIC CONVERTER (OPTIONAL)
(1) ADDITIONAL M18 X 1.5MM O2 SENSOR BUNG WITH PLUG OPTIONAL AIRBOX WITH PROTECTIVE EDGING
(1) 4-BOLT FLANGE GASKET
(1) 2-BOLT FLANGE GASKET
(4) M10 X 1.25MM EXHAUST STUDS
(2) M10 X 1.25MM X 40MM HEX BOLTS, STAINLESS STEEL
(6) M10 X 1.25MM SERRATED FLANGE NUTS, STAINLESS STEEL
(2) M10 X 1.25MM X 16MM HEX BOLTS (WITH 5MM HEAD HEIGHT), STAINLESS STEEL
(4) M10 WASHERS, STAINLESS STEEL
(2) M8 X 1.25MM X 20MM FLANGE BOLTS, STAINLESS STEEL
(1) M6 X 1.0MM X 10MM FLANGE BOLT, STAINLESS STEEL
TOOLS NEEDED
12MM DEEP SOCKET
13MM DEEP SOCKET
14MM SOCKET
14MM DEEP SOCKET
15MM DEEP SOCKET
E10 TORX SOCKET
3/8” DRIVE 6” EXTENSION
3/8” DRIVE SWIVEL SOCKET
3/8” DRIVE RATCHET
14MM RATCHET WRENCH
14MM WRENCH
22MM WRENCH
POP-CLIP PLIERS
FLATHEAD SCREWDRIVER
Install Time: 2 Hours
Difficulty: 3/5
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift
Download the full install guide for MMDP-WRX-15 to learn how to install your new 2015 Subaru WRX/STI Down Pipe.
Download here: https://lib.store.yahoo.net/lib/yhst-6…
Websit: https://www.jmtornillo.com
Ahora me gustaría presentarle las tuercas ciega.
Los estándares son DIN917, DIN986, DIN1587
Los materiales son acero al carbono bajo, acero inoxidable y cobre etc.
Este es la tuerca ciega de acero inoxidable. y este es de acero al carbono bajo Zincada-
La tuerca es disponible con tipos de tornillos en aplicación.
Tambien podemos fabricar tuercas ciega especiales según sus muestras y dibujos
Shanghai Jian y Mei es un proveedor profesional de tuercas de estándar IFI y DIN, por ejemplo tuerca hexagonal pesada, tuerca hexagonal, tuerca cuadrada, tuerca flange, tuerca de bloqueo y Tuercas hexagonales de Acoplamiento etc.
Tenemos tamaños completos de M3 a M100, y 3/16” a 4”.
Los materiales pueden ser acero al carbono, acero de aleación, acero inoxidable y cobre.
Grados disponibles de tuercas son ASTM A563 grado A, grado C, grado DH, ASTM A194 Gr. 2, 2H, 7, 7M,8, 8M, SAE J995 Gr.2, 5,8; CL4, 5, 6, 8, 10, 12.
Los acabados son Zinc, Zinc amarillo, Óxido negro, galvanizado etc.
Tenemos más de ocho años de experiencia exportar tuercas ciega al mercado américo y poseemos buena fama, enfíen en nosotros que somos su proveedor fiable de fijación!
No dude en contactarnos en cualquier momento!
Shanghai Jian & Mei Industry and Trade Co., Ltd
Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C, Code:200126
Tel: 0086-21-33328690-8058
Fax: 0086-21-68413263
English Web：www.jm-industry.com Websit: https://www.jmtornillo.com
Contact: Mrs.Xarella Huang
Email: Jminfo@jm-industry.com
Websit: https://www.jm-industry.com