This video will guide you through the process of bleeding SRAM MTB brakes with Bleeding Edge Technology. This includes:
Code R
Code RSC
Guide Ultimate
Guide RSC
Guide RS
Guide R
Level Ultimate
Level TLM
You will need the following tools and supplies:
Hex Wrench: 2.5 mm
Hex Bit Sockets: 2.5, 4 mm
TORX® Wreches: T8, T10
TORX® Bit Sockets: T10
Torque Wrench
Wrenches: 8, 10 mm
Safety Glasses
Nitrile Gloves
SRAM Brake Bleed Kit
If you have questions about the installation or service of these or any SRAM components, please consult your local qualified bicycle mechanic.
I Rail fastening and clamping products;
1. Clips and clamps: E series include:E1609,E1809,E1817,E2007,E2009,E2055 and W series include SKL1,SKL3,SKL12,SKL14,SKL75 and other clamps;
2. Square head screw spikes and hook spikes: Diameter 5/8,3/4,7/8,15/16,1¡±, length from 4¡± to 12¡±series spikes and Ss series include Ss5,Ss8,Ss23,Ss25,Ss36 spikes;
3. Clip Bolt and Track bolt: Clip bolts of the HS26, HS32 series, switch bolts, square head bolts, Insert Bolts and AREMA Track Bolt;
4. Insulators: Nylon insulators used for E Clips and Guide plates for SKL clips;
5. Dowels: Plastic and nylon dowels used for all kinds of screw spikes;
6. Shoulders: Assembly with all kinds of e Clips.
7. Insulating pad: Plastic, rubber and EVA pad Used for E clips and SKL clips;
8. Steel pad: Cast iron and forging steel pad used for E clips and SKL clips.
II Rail Jointing products:
1. Fish plate: America used 115RE, 132RE fish plates; Europe, Africa and Asia used UIC54, UIC60 fish plates, South America used TJ45, TJ57 fish plates and the UK used BS60, BS75 fish plates;
2. Fish bolts: Bolts used for the fish plates listed above;
3. Gauge rod: AREMA 1-1/4¡± and UIC, BS rail used gauge rods.
III High strength bolts and other non-standard fasteners:
1. Hex bolts£»with the diameter over M24 DIN,ASTM, BS Hex bolts, grade 4.6,4.8,5.6,5.8,6.8,8.8,10.9,12.9;
2. All kinds of nuts, standard parts, washers, Construction Industry bolts and precision parts.