Link to Repair method (all credit to original posters):
https://drive.google.com/file/d/0B5F06FXn8WiIanlKbTQyd2VYQ1U/edit?usp=sharing
https://gorup-sinkovec.net/diy/rattling-noise-in-toyota-corolla-intake-manifold-solved/
Toyota Intake baffle rattling causing engine noise making the car sound horrible and like a diesel engine, fixed using a few screws – so simple.
1. you can do this with the manifold still on the car if you want and put two screws in from the top or you can do by taking the manifold off the car and putting screws in from the other side of the manifold. The screws need to go in at an angle to catch the baffle inside the manifold.
2. I took the manifold off and couldn’t find any rattling component, there wasnt anything loose inside the manifold but it was still causing the terrible engine noise. Put two screws in from behind and two from the front and this has eliminated the noise.
3. Word of caution – one poster claims that a screw broke off on them and wrecked the engine as it got sucked into the engine. Using the screw method will pinpoint the problem, if you want to avoid wrecking the engine by a screw breaking or getting sucked in, please consider going to a scrap yard to get a replacement intake manifold.
his Old House general contractor Tom Silva shows how to open up a wall for a large glass slider. (See below for a shopping list and tools.)
Click here to SUBSCRIBE to the official This Old House YouTube channel: https://www.youtube.com/subscription_center?add_user=thisoldhouse
Full episode: https://www.youtube.com/watch?v=PTQJtE9D6nk&index=5&list=PLkJADc1qDrr-ZmCu0t_YNmTXHVt80JDyE
How to Weatherstrip an Exterior Door: https://www.youtube.com/watch?v=wEJvpoVrwLk&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=28
How to Create an Interior Door Opening: https://www.youtube.com/watch?v=r_tX79jtcaQ&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=30
How to Replace a Rotted Windowsill: https://www.youtube.com/watch?v=x8iu9dLrV-E&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=32
Shopping List for How to Install a Sliding Glass Door:
- sliding glass door with solid-vinyl doorjamb
- pressure-treated 2x4s
- 2x4s
- ⅝-inch-thick exterior-grade plywood
- 15-pound builders paper
- quick-setting cement
- minimal-expanding foam, used to insulate around new door
- silicone sealant
- masonry screws
- 3½-inch (16d) nails
- 2½-inch (8d) nails
- 5/16-inch staples
- 3-inch screws
- wood shims
- wood shingles and shingle nails, for finishing new wall section
Tools List for How to Install a Sliding Glass Door:
- reciprocating saw
- 12-pound sledgehammer
- 4-foot level
- hammer drill fitted with masonry bit
- drill/driver
- square shovel
- mixing tub, used for mixing cement
- caulk gun
- pointed trowel
- flat trowel
- hammer stapler
- utility knife
Follow This Old House:
Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse
Pinterest: https://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: https://instagram.com/thisoldhouse
Tumblr: https://thisoldhouse.tumblr.com/