Brass Tip Socket Set Screws
Metric Size: M1.4-M52, Inch Size: 0# - 2"
Various Drive and Point Types
Various Surface Finishes
Other Material Grades are available
Please feel free to contact us for more details
The US is one of the only countries using the Imperial SAE sizing system for nuts, bolts, screws, washers, etc. The rest of the world uses the metric system. Metric sizes should be abundant and CHEAP! I found otherwise looking for exact types & sizes for an import auto restoration project. I also learned the hard way about hardness grading.
We use FreeCAD’s Part Design Workbench to model a Flanged Pulley shown at the beginning of the video. This video is the same as Tutorial 05 but with a few fixes and with audio added. The index is below (click “Show More”); if you have any questions or comments please post them in the FreeCAD forum, https://forum.freecadweb.org’ Please note that before your first post is actually published it must be approved by a moderator.
This tutorial was done using the FreeCAD version 0.14.2370 for Windows XP. Newer FreeCAD versions have since been released, so your version should have all the tools shown in this tutorial.
A dimensioned copy of the .pdf file used in the video can be downloaded from:
https://www.dropbox.com/s/ew905xiujgumtla/Flanged_Pulley.PDF
Index:
00:00 Introduction
00:32 Create Sketch with Polyline
00:55 Toggle Polyline Mode
01:42 Use of Coincident Constraint
01:50 Use of Horizontal Constraint
02:00 Use of Sketcher Fillet tool
02:21 Use of Equality Constraint
03:30 Use of Horizontal Distance Constraint
03:49 Use of Vertical Distance Constraint
04:05 Use of Equality Constraint
04:36 Delete redundant Constraint
04:47 Use of Radius Constraint
05:01 Use of Fix Point Onto Object Constraint
07:35 Revolution of a Sketch
07:55 Editing a Sketch to change the model
08:2- Toggle object visibility
08:31 Automatically fix point onto a line by Preselection
09:23 Create Spoke hole by Pocketing Through All
09:54 Create a Polar Pattern Feature
10:29 Edit Sketch (bolt holes) to change the model
11:07 Creating the keyway
11:14 Sketcher Rectangle
11:18 Sketcher Create Edge Linked to External Geometry and Fix Point onto External Geometry
11:34 Sketcher Symmetry Constraint, Horizontal and Vertical Distance Constraints
12:18 Create keyway by Pocketing Through All
12:47 Change Occurrences of Polar Pattern Feature to increase number of spokes
13:20 Fillet all bolt hole edges