websites:https://www.minjiesteel.com/
We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.
Email: info@minjiesteel.com websites:https://www.minjiesteel.com/
We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.
Email: info@minjiesteel.com
https://www.etrailer.com/Dexter/84655UC1.html
Today on our horse trailer, we're going to be installing the Dexter Trailer Hub Assembly for 3,500-lb axles with a 6 on 5-1/2 bolt pattern, part number 84655UC1. We'll first begin by removing the wheel from the old hub. Next we'll need to remove the old hub. To do this, we'll first remove the dust cap. We'll then need to remove the cotter pin as well as the castle nut. Then go ahead and slide the hub outward, pulling the flat washer and the outer bearing off, then we can go ahead and pull the rest of the hub assembly off. Your flat washer, as well as the castle nut will need to be reused from the old hub assembly.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.